Team:iHKU/protocol

From 2008.igem.org

(Difference between revisions)
Line 224: Line 224:
                       <th width="10%">&nbsp;</th>
                       <th width="10%">&nbsp;</th>
                         <td width="80%" align="left" background="#p1"><h1 class="style7">Protocols</h1>
                         <td width="80%" align="left" background="#p1"><h1 class="style7">Protocols</h1>
-
                           <p class="style7">Content:</p>
+
                           <p class="style7"><a name="top" id="top"></a>Content:</p>
                           <h2 class="style7">Novel Protocols</h2>
                           <h2 class="style7">Novel Protocols</h2>
                           <ul>
                           <ul>
                             <li class="style18">PROTOCOL-1 <u><a href="#p1">Pattern formation</a></u></li>
                             <li class="style18">PROTOCOL-1 <u><a href="#p1">Pattern formation</a></u></li>
                             <li class="style18">PROTOCOL-2 <u><a href="#p2">Picture capture</a></u></li>
                             <li class="style18">PROTOCOL-2 <u><a href="#p2">Picture capture</a></u></li>
-
                             <li class="style18">PROTOCOL-3 <u><a href="#p3">Growth curve on agar plate</a></u></li>
+
                             <li class="style18">PROTOCOL-3 <u><a href="#p4">Brightness cell concentration relationship Measurement</a></u></li>
-
                            <li class="style18">PROTOCOL-4 <u><a href="#p4">Brightness cell concentration relationship Measurement</a></u></li>
+
                             <li class="style18">PROTOCOL-4 <u><a href="#p5">Migration rate measurement</a></u> </li>
-
                             <li class="style18">PROTOCOL-5 <u><a href="#p5">Migration rate measurement</a></u> </li>
+
                             <li class="style18">PROTOCOL-5 <u><a href="#p6">Harvest sample from agar plate</a></u></li>
-
                             <li class="style18">PROTOCOL-6 <u><a href="#p6">Harvest sample from agar plate</a></u></li>
+
                           </ul>
                           </ul>
                           <h2 class="style17">Regular Protocols</h2>
                           <h2 class="style17">Regular Protocols</h2>
                           <ul class="style18">
                           <ul class="style18">
-
                             <li>PROTOCOL-7 <u><a href="#p7">β-galactosidase assay</a></u> </li>
+
                             <li>PROTOCOL-6 <u><a href="#p7">β-galactosidase assay</a></u> </li>
-
                             <li>PROTOCOL-8 <u><a href="#p8">Western blot</a></u></li>
+
                             <li>PROTOCOL-7 <u><a href="#p8">Western blot</a></u></li>
-
                             <li>PROTOCOL-9 <u><a href="#p9">Recombineering</a></u></li>
+
                             <li>PROTOCOL-8 <u><a href="#p9">Recombineering</a></u></li>
-
                             <li>PROTOCOL-10 <a href="#p10">Chemical-in-plug assay </a></li>
+
                             <li>PROTOCOL-9 <u><a href="#p11">Most Probable Number  method (MPN)</a></u></li>
-
                            <li>PROTOCOL-11 <u><a href="#p11">Most Probable Number  method (MPN)</a></u></li>
+
                             <li>PROTOCOL-10 <u><a href="#p12">Bradford assay</a></u></li>
-
                             <li>PROTOCOL-12 <u><a href="#p12">Bradford assay</a></u></li>
+
                           </ul>
                           </ul>
                           <h2 class="style17">Other Protocols</h2>
                           <h2 class="style17">Other Protocols</h2>
Line 277: Line 275:
                             <li>Wait for at least one and a half hour before adding cells to the  plate.</li>
                             <li>Wait for at least one and a half hour before adding cells to the  plate.</li>
                           </ol>
                           </ol>
-
                           <p class="style18">iGEM preculture for pattern development on  Soft Agar Plate</p>
+
                           <p class="style18"> preculture for pattern development on  Soft Agar Plate</p>
                           <ol class="style18">
                           <ol class="style18">
                             <li>Add 2ml LB with appropriate  antibiotics to a Falcon 10ml preculture tube. </li>
                             <li>Add 2ml LB with appropriate  antibiotics to a Falcon 10ml preculture tube. </li>
Line 290: Line 288:
                             <li>Glucose &amp; Arabinose can be  stored in room temperature but best is to store it in 4oC.</li>
                             <li>Glucose &amp; Arabinose can be  stored in room temperature but best is to store it in 4oC.</li>
                           </ol>
                           </ol>
-
                           <p class="style18">&nbsp;</p>
+
                           <p class="style18"><a href="#top">[Back to Top]</a></p>
                           <p class="style18"><strong><a name="p2" id="p2"></a>PROTOCOL-2 <em><u>Picture capture</u></em></strong></p>
                           <p class="style18"><strong><a name="p2" id="p2"></a>PROTOCOL-2 <em><u>Picture capture</u></em></strong></p>
                           <p class="style18">Preparation:</p>
                           <p class="style18">Preparation:</p>
                           <ol class="style18">
                           <ol class="style18">
                             <li>Light source: lamp</li>
                             <li>Light source: lamp</li>
-
                             <li>Frame: card-board box with size  xx*xx*xx</li>
+
                             <li>Frame: card-board box (e.g.with size37cm*28cm*22cm)</li>
                             <li>Background curtain:  light-absorb cloth</li>
                             <li>Background curtain:  light-absorb cloth</li>
-
                             <li>Picture capture device: web  camera ()</li>
+
                             <li>Picture capture device: web  camera</li>
-
                             <li>Computer: desktop all laptop ()</li>
+
                             <li>Computer: desktop all laptop</li>
                           </ol>
                           </ol>
                           <p class="style18">Location: warm room (37 ℃) <br />
                           <p class="style18">Location: warm room (37 ℃) <br />
                             Device setting: (Fig.1.) <br />
                             Device setting: (Fig.1.) <br />
                             The lamp should be fixed on  the wall with its light shooting directed to the wall. The reflected light will  then enter the dark box with the light-absorb cloth wrapped inside. Drill  hole(s) on the top of the box whose size is fit for the camera lens. A box of  our size can hold up to 4 web cameras to take picture simultaneously.<br />
                             The lamp should be fixed on  the wall with its light shooting directed to the wall. The reflected light will  then enter the dark box with the light-absorb cloth wrapped inside. Drill  hole(s) on the top of the box whose size is fit for the camera lens. A box of  our size can hold up to 4 web cameras to take picture simultaneously.<br />
-
                             The light-absorb cloth (<em><u>find a sample  picture here</u></em>) is simply stapled to the inside wall of the  card-board box. It will largely reduce the light refraction inside the dark box  as well as give a high contrast background to the bacteria pattern which is  white in observation.<br />
+
                             The light-absorb cloth is simply stapled to the inside wall of the  card-board box. It will largely reduce the light refraction inside the dark box  as well as give a high contrast background to the bacteria pattern which is  white in observation.<br />
   <em>(If  the light intensity is still too high, a piece of normal A4 paper or paper  tissue can be used as a mask on the open side of the box.)</em></p>
   <em>(If  the light intensity is still too high, a piece of normal A4 paper or paper  tissue can be used as a mask on the open side of the box.)</em></p>
-
                           <p align="center" class="style18"><img src="image/protocol_pic1.jpg" width="500" height="250" /></p>
+
                           <p align="center" class="style18"><img src="protocol_pic1.png" width="500" height="250" /></p>
                           <p class="style18">Picture  capturing:<br />
                           <p class="style18">Picture  capturing:<br />
Software used for monitoring  and capturing pictures may be differed from various web cameras made from  different companies. Since the web camera we purchased is a product of <em>Vimicro</em>, we basically used their  software <em>Vimcam </em>(which can be found <a href="http://www.vimicro.com/english/">here</a>) for the analysis.</p>
Software used for monitoring  and capturing pictures may be differed from various web cameras made from  different companies. Since the web camera we purchased is a product of <em>Vimicro</em>, we basically used their  software <em>Vimcam </em>(which can be found <a href="http://www.vimicro.com/english/">here</a>) for the analysis.</p>
-
                           <p class="style18">Since we may want to take picture for  the same plate repetitively in a fixed time interval and a long time duration,  we used a automatic approach with the help of a simple Java program. (You can  find the Java code <u>here</u>, and a simple  description is given <u>here</u>.) The Java  program is will simulate a robot who will click and release the left mouse  button for a given time interval and this program will stop after a certain  time duration.</p>
+
                           <p class="style18">Since we may want to take picture for  the same plate repetitively in a fixed time interval and a long time duration,  we used a automatic approach with the help of a simple Java program. (You can  find the Java code and a simple  description here) The Java  program is will simulate a robot who will click and release the left mouse  button for a given time interval and this program will stop after a certain  time duration.</p>
-
                           <p class="style18">&nbsp;</p>
+
                           <p class="style18"><a href="#top">[Back to Top]</a></p>
-
                        <p class="style18"><strong><a name="p3" id="p3"></a>PROTOCOL-3 <em><u>Growth curve on agar plate</u></em></strong></p>
+
                          <p class="style18"><strong><a name="p4" id="p4"></a>PROTOCOL-3 <em><u>Brightness cell concentration relationship Measurement</u></em></strong></p>
-
                        <p class="style18"><strong><a name="p4" id="p4"></a>PROTOCOL-4 <em><u>Brightness cell concentration relationship Measurement</u></em></strong></p>
+
                         <p class="style18">Day 1 –Streak the strand of cells to be tested on agarose plate to  form single colony</p>
                         <p class="style18">Day 1 –Streak the strand of cells to be tested on agarose plate to  form single colony</p>
                         <p class="style18">Day 2 – Start seed culture</p>
                         <p class="style18">Day 2 – Start seed culture</p>
Line 318: Line 315:
                         </ol>
                         </ol>
                         <p class="style18">Day 2 – Start pre-culture before leaving<br />
                         <p class="style18">Day 2 – Start pre-culture before leaving<br />
-
                           2)? Afternoon or evening: centrifuge the LB seed culture at RT; drain the  medium as clean as possible; resuspend the cells with the culture medium using  conical flusk with as large volume as possible, I liter or 500 ml flusk is  recommeded (it’s better to centrifuge and resuspend for another time); measure  OD; inoculate the seed cells into 1/4 the flusk volume’s (exp, 250ml for 1  liter flusk) minimal medium (2% LB medium)</p>
+
                           2)  Afternoon or evening: centrifuge the LB seed culture at RT; drain the  medium as clean as possible; resuspend the cells with the culture medium using  conical flusk with as large volume as possible, I liter or 500 ml flusk is  recommeded (it’s better to centrifuge and resuspend for another time); measure  OD; inoculate the seed cells into 1/4 the flusk volume’s (exp, 250ml for 1  liter flusk) minimal medium (2% LB medium)</p>
                         <p class="style18">Day 3 – Start experimental culture after  arriving</p>
                         <p class="style18">Day 3 – Start experimental culture after  arriving</p>
                         <ol class="style18">
                         <ol class="style18">
Line 332: Line 329:
                           </ol>
                           </ol>
                         <div align="center" class="style18">
                         <div align="center" class="style18">
-
                           <table border="1" cellspacing="0" cellpadding="0">
+
                           <div align="center"><img src="image/protocol_table1.png" width="500" height="100" /></div>
-
                            <tr>
+
-
                              <td width="58" valign="top"><p>Tube</p></td>
+
-
                              <td width="66" valign="top"><p>1</p></td>
+
-
                              <td width="66" valign="top"><p>2</p></td>
+
-
                              <td width="66" valign="top"><p>3</p></td>
+
-
                              <td width="66" valign="top"><p>4</p></td>
+
-
                              <td width="66" valign="top"><p>5</p></td>
+
-
                              <td width="66" valign="top"><p>6</p></td>
+
-
                            </tr>
+
-
                            <tr>
+
-
                              <td width="58" valign="top"><p>Bacteria(ml)</p></td>
+
-
                              <td width="66" valign="top"><p>0</p></td>
+
-
                              <td width="66" valign="top"><p>1</p></td>
+
-
                              <td width="66" valign="top"><p>2</p></td>
+
-
                              <td width="66" valign="top"><p>3</p></td>
+
-
                              <td width="66" valign="top"><p>4</p></td>
+
-
                              <td width="66" valign="top"><p>5</p></td>
+
-
                            </tr>
+
-
                            <tr>
+
-
                              <td width="58" valign="top"><p>Cell(ml)</p></td>
+
-
                              <td width="66" valign="top"><p>5</p></td>
+
-
                              <td width="66" valign="top"><p>4</p></td>
+
-
                              <td width="66" valign="top"><p>3</p></td>
+
-
                              <td width="66" valign="top"><p>2</p></td>
+
-
                              <td width="66" valign="top"><p>1</p></td>
+
-
                              <td width="66" valign="top"><p>0</p></td>
+
-
                            </tr>
+
-
                            <tr>
+
-
                              <td width="58" valign="top"><p>LB-Agar(ml)</p></td>
+
-
                              <td width="66" valign="top"><p>5</p></td>
+
-
                              <td width="66" valign="top"><p>5</p></td>
+
-
                              <td width="66" valign="top"><p>5</p></td>
+
-
                              <td width="66" valign="top"><p>5</p></td>
+
-
                              <td width="66" valign="top"><p>5</p></td>
+
-
                              <td width="66" valign="top"><p>5</p></td>
+
-
                            </tr>
+
-
                          </table>
+
                         </div>
                         </div>
                         <blockquote class="style18">
                         <blockquote class="style18">
Line 379: Line 339:
                             <li>Measure the average brightness  of each plate.</li>
                             <li>Measure the average brightness  of each plate.</li>
                           </ul>
                           </ul>
-
                           </ul>
+
                           <p><a href="#top">[Back to Top]</a></p>
-
                         <p class="style18"><strong><a name="p5" id="p5"></a>PROTOCOL-5 <em><u>Migration rate measurement</u></em></strong> </p>
+
                        </ul>
 +
                         <p class="style18"><strong><a name="p5" id="p5"></a>PROTOCOL-4 <em><u>Migration rate measurement</u></em></strong> </p>
                         <p class="style18">Day 1 –Streak the strand of cells to be tested on agarose  plate to form single colony</p>
                         <p class="style18">Day 1 –Streak the strand of cells to be tested on agarose  plate to form single colony</p>
                         <p class="style18">Day 2 – Start seed culture</p>
                         <p class="style18">Day 2 – Start seed culture</p>
Line 390: Line 351:
                         <ol class="style18">
                         <ol class="style18">
                           <li>Afternoon or evening:  centrifuge the pre-culture ar RT; drain the medium as clean as possible;  resuspend the cells with the culture medium (it’s better to centrifuge and  resuspend for another time); measure OD; When it is below 1.000 inoculate the  pre-culture cells into 5 ml minimal medium</li>
                           <li>Afternoon or evening:  centrifuge the pre-culture ar RT; drain the medium as clean as possible;  resuspend the cells with the culture medium (it’s better to centrifuge and  resuspend for another time); measure OD; When it is below 1.000 inoculate the  pre-culture cells into 5 ml minimal medium</li>
-
                           <li>When OD reaches 1.000, use  pipette to drop 2 ul bacteria solution onto the centre of the prepared plate.</li>
+
                           <li>When OD reaches 1.000, use  pipette to drop 2 μl bacteria solution onto the centre of the prepared plate.</li>
                           <li>Rotate the plate upside down  and fix it below the camera, use automatic Photo taking to capture Cell  migration status over-night.</li>
                           <li>Rotate the plate upside down  and fix it below the camera, use automatic Photo taking to capture Cell  migration status over-night.</li>
                         </ol>
                         </ol>
                         <p class="style18">Day 3 – Collect  data</p>
                         <p class="style18">Day 3 – Collect  data</p>
-
                         <ul class="style18">
+
                         <ol>
-
                           <li>Afternoon: 24 hours after photo  taking, retrieve the image data and measure the brightness of whole plate along  time course to analyze the migration rate.</li>
+
                           <li> Afternoon: 24 hours after photo  taking, retrieve the image data and measure the brightness of whole plate along  time course to analyze the migration rate.</li>
-
                         </ul>
+
                          </ol>
-
                         <p class="style18"><strong><a name="p6" id="p6"></a>PROTOCOL-6 <em><u>Harvest sample from agar plate</u></em></strong></p>
+
                         <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
 +
                         <p class="style18"><strong><a name="p6" id="p6"></a>PROTOCOL-5 <em><u>Harvest sample from agar plate</u></em></strong></p>
                         <ol class="style18">
                         <ol class="style18">
                           <li>Culture of the <em>E.coli</em> on  the 35mm petradish</li>
                           <li>Culture of the <em>E.coli</em> on  the 35mm petradish</li>
Line 414: Line 376:
                           </ol>
                           </ol>
                         </ol>
                         </ol>
-
                         <p class="style18">&lt;Note&gt;</p>
+
                         <blockquote>
 +
                          <p class="style18"> &lt;Note&gt;</p>
 +
                        </blockquote>
                         <ul>
                         <ul>
                           <li class="style18">Cool the agar to 42’C before mix it with cell otherwise the cell  will be killed.</li>
                           <li class="style18">Cool the agar to 42’C before mix it with cell otherwise the cell  will be killed.</li>
Line 421: Line 385:
                           <li class="style18">All agars should be transferred to the tubes for the accuracy of  later measurement.</li>
                           <li class="style18">All agars should be transferred to the tubes for the accuracy of  later measurement.</li>
                           </ul>
                           </ul>
 +
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
                         <p>&nbsp;</p>
                         <p>&nbsp;</p>
                         <h3>Regular Protocols</h3>
                         <h3>Regular Protocols</h3>
-
                         <p><span class="style18"><strong><a name="p7" id="p7"></a>PROTOCOL-7 <em><u>β-galactosidase assay</u></em> </strong><br />
+
                         <p><span class="style18"><strong><a name="p7" id="p7"></a>PROTOCOL-6 <em><u>β-galactosidase assay</u></em> </strong><br />
1. Sample  treatment<br />
1. Sample  treatment<br />
-
?a)? Harvest the culture by centrifuge (13krpm*1.5min) followed by washing  with 1ml PBS twice<br />
+
a)  Harvest the culture by centrifuge (13krpm*1.5min) followed by washing  with 1ml PBS twice<br />
-
?b)? Resuspend the pellet with PBS and protease inhibitor cocktail. <br />
+
b)  Resuspend the pellet with PBS and protease inhibitor cocktail. <br />
-
?c)? Sonication for (5.5seconds+1second pulse)*10 minutes <br />
+
c)  Sonication for (5.5seconds+1second pulse)*10 minutes <br />
-
?d)? Centrifuge (13krpm * 1min)<br />
+
d)  Centrifuge (13krpm * 1min)<br />
2. ONPG  enzymatic reaction<br />
2. ONPG  enzymatic reaction<br />
-
?a) Aliquot 200 microliter of treated sample  into the 96 wells plate<br />
+
a) Aliquot 200 microliter of treated sample  into the 96 wells plate<br />
-
?b) Add 40 microliter of ONPG(4mg/ml in ddw)  into each well<br />
+
b) Add 40 microliter of ONPG(4mg/ml in ddw)  into each well<br />
-
?c)Read the OD420 every 10minutes for 5 minutes  at 37’C on the spectrometer <br />
+
c)Read the OD420 every 10minutes for 5 minutes  at 37’C on the spectrometer <br />
3.  Trouble shooting<br />
3.  Trouble shooting<br />
-
?a) Raw reading beyond most accurate region of  o.2~0.4<br />
+
a) Raw reading beyond most accurate region of  o.2~0.4<br />
-
?b) Loss of activity due to high temperature or  malfunction of the protease inhibitor<br />
+
b) Loss of activity due to high temperature or  malfunction of the protease inhibitor<br />
-
?c) Incomplete cell lysis because too short  sonication time or incomplete resuspension of the pellet<br />
+
c) Incomplete cell lysis because too short  sonication time or incomplete resuspension of the pellet<br />
-
?d) The temperature for the enzymatic reaction  should be 37’C, so the spectrometer should be prewarmed.<br />
+
d) The temperature for the enzymatic reaction  should be 37’C, so the spectrometer should be prewarmed.<br />
&lt;Note&gt;<br />
&lt;Note&gt;<br />
Must keep  the sample at low temperature to avoid the loss of enzymatic activity.</span></p>
Must keep  the sample at low temperature to avoid the loss of enzymatic activity.</span></p>
-
                         <p class="style18"><strong><a name="p8" id="p8"></a>PROTOCOL-8 <em><u>Western blot</u></em></strong></p>
+
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
 +
                         <p class="style18"><strong><a name="p8" id="p8"></a>PROTOCOL-7 <em><u>Western blot</u></em></strong></p>
                         <ul>
                         <ul>
                           <li class="style18">Buffer preparation
                           <li class="style18">Buffer preparation
Line 498: Line 464:
                           </li>
                           </li>
                           </ul>                         
                           </ul>                         
-
                         <p><strong><a name="p9" id="p9"></a>PROTOCOL-9 <em><u>Recombineering</u></em></strong><br />
+
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
 +
                         <p><strong><a name="p9" id="p9"></a>PROTOCOL-8 <em><u>Recombineering</u></em></strong><br />
The procedure  used was similar to that described by Watt <em>et  al</em> (<u>Ref</u>). About 500                                                                      μl from overnight cultures [5    ml    L medium (containing antibiotic where applicable) inoculated  from single colonies, grown at 32°C for 18    h] was expanded into 50    ml of L medium in a 250    ml Erlenmeyer flask, and incubated at 32°C for 2    h (until OD600 of <em>ca.</em> 0.4–0.6). Flasks were transferred to a  shaking water bath at 42°C and incubated for 14–15    min, before cooling to 0°C as rapidly as possible in iced  water. After 15–20    min, cells were harvested by centrifugation at 0°C (4000    g, 9    min). Cell pellets were carefully washed three times with  sterilized ice-cold water (2    ×    50    ml, then 1    ×    1.5    ml) then re-suspended in 100–200    μl of ice-cold water. Competent cells (50    μl) were transformed with 50–200    ng of (gel purified) linear dsDNA targeting cassette using a  BioRad electroporator (1.8    kV, 25    mF, 200    W). The L medium (1    ml) was added to the transformed cell mixture, which was incubated  at 32°C, for 2–2?    h. Cells were collected by centrifugation, <em>ca</em>. 900    μl of supernatant media was discarded, and then the  resuspended cells were plated onto LB agar containing the appropriate  antibiotic to select for resistant colonies.</p>
The procedure  used was similar to that described by Watt <em>et  al</em> (<u>Ref</u>). About 500                                                                      μl from overnight cultures [5    ml    L medium (containing antibiotic where applicable) inoculated  from single colonies, grown at 32°C for 18    h] was expanded into 50    ml of L medium in a 250    ml Erlenmeyer flask, and incubated at 32°C for 2    h (until OD600 of <em>ca.</em> 0.4–0.6). Flasks were transferred to a  shaking water bath at 42°C and incubated for 14–15    min, before cooling to 0°C as rapidly as possible in iced  water. After 15–20    min, cells were harvested by centrifugation at 0°C (4000    g, 9    min). Cell pellets were carefully washed three times with  sterilized ice-cold water (2    ×    50    ml, then 1    ×    1.5    ml) then re-suspended in 100–200    μl of ice-cold water. Competent cells (50    μl) were transformed with 50–200    ng of (gel purified) linear dsDNA targeting cassette using a  BioRad electroporator (1.8    kV, 25    mF, 200    W). The L medium (1    ml) was added to the transformed cell mixture, which was incubated  at 32°C, for 2–2?    h. Cells were collected by centrifugation, <em>ca</em>. 900    μl of supernatant media was discarded, and then the  resuspended cells were plated onto LB agar containing the appropriate  antibiotic to select for resistant colonies.</p>
-
                         <p>&nbsp;</p>
+
                         <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
-
                        <p class="style18"><strong><a name="p10" id="p10"></a>PROTOCOL-10 Chemical-in-plug assay </strong></p>
+
                         <p><strong><a name="p11" id="p11"></a>PROTOCOL-9 <em><u>Most Probable Number  method (MPN)</u></em></strong><br />
-
                        <p class="style18">Day1<br />
+
-
                          <u>MG1655 inoculation</u><br />
+
-
Pick a single colony and inoculate it  in 5ml LB using a 20ml Sterilin tube. Incubate at 37oC at medium  rotation speed overnight.<br />
+
-
(Fresh ring pattern plates are  required for Day2, so better prepare it in Day1 by following the pattern  development on soft agar plate protocol)</p>
+
-
                        <p class="style18">Day2<br />
+
-
                          <u>Prepare EDTA+ PBS </u></p>
+
-
                        <ol class="style18">
+
-
                          <li>Dissolve  a PBS tablet in 100ml in a 200ml Pyrex bottle.</li>
+
-
                          <li>Add  an appropriate amount of EDTA to the PBS</li>
+
-
                        </ol>
+
-
                        <p class="style18"><u>Prepare 10M Sodium Acetate solution in  PBS</u></p>
+
-
                        <ol class="style18">
+
-
                          <li>Weigh  1.3608g Sodium acetate trihydrate  (Sigma) and place it in a 20ml Sterilin tube. Add as little as EDTA+ PBS as  possible to dissolve the sodium acetate, heat the mixture in a boiling water  bath, add more PBS if necessary. Repeat the process until all crystals  dissolve.</li>
+
-
                          <li>Measure  the final volume of the solution and calculate the actual molarity of the  solution.</li>
+
-
                        </ol>
+
-
                        <p class="style18"><u>Agar preparation</u> </p>
+
-
                        <ol>
+
-
                          <li class="style18">Prepare  a 0.3% solution and a 2% Agar solution by dissolving 0.3g and 1g of BactoTMAgar  in 100ml and 50ml water respectively in a 400ml Pyrex bottle.</li>
+
-
                          <li class="style18">Autoclave  the 2 solutions</li>
+
-
                          <li class="style18">Place  0.3% solution in 42oC water bath to cool the solution to a  temperature which is tolerable to the bacteria.</li>
+
-
                          </ol>
+
-
                        <p align="center"><u><img src="image/protocol_pic2.jpg" width="500" height="250" /></u></p>
+
-
                        <p class="style18">  <u>Sample Collection</u></p>
+
-
                        <ol class="style18">
+
-
                          <li>Using pipette, smash the gel by the  coloured regions one by one and transfer the gel to a weight-measured Eppendorf  tube. Therefore the 3 tubes should have roughly equal weight of gel inside.</li>
+
-
                          <li>Vortex the tubes vigorously for at  least 30s to get it to be in liquid form.</li>
+
-
                          <li>Transfer the samples to a 5ml Sterilin  tube.</li>
+
-
                        </ol>
+
-
                        <p class="style18"><u>Making Chemical Plug</u> <br />
+
-
                          (Perform these steps as quick as  possible as 2% agar solidifies quickly)</p>
+
-
                        <ol class="style18">
+
-
                          <li>While  the 2% agar is still warm-hot-ish (55o is fine but 60-70oC  is recommended), add 3 ml of the agar to a sample collected from the plate.  Quickly mix the two well and transfer the mixture to a IWAKI 3cm micro Petri  Dish. Remove as much bubbles on as possible.</li>
+
-
                          <li>Perform  the same to the rest of the samples as well as to 0.3ml 10M sodium acetate,  therefore a total of 4 micro plates of “plugs” are made.</li>
+
-
                        </ol>
+
-
                        <p class="style18"><u>Pre-culture &amp; wash cells</u></p>
+
-
                        <ol class="style18">
+
-
                          <li>Transfer  1ml of the overnight culture to a 50ml LB in a 250ml conical flask, incubate at  37oC at 230RPM for 1 and 1/4 of an hour until OD600  reaches log phase (0.5 – 0.8)</li>
+
-
                          <li>Transfer  the culture to a 50ml IWAKI tube</li>
+
-
                          <li>Centrifuge  at 4000RPM, 10mins.</li>
+
-
                          <li>Use  equal volume EDTA+ PBS to resuspend and wash the cells</li>
+
-
                          <li>Repeat  step 3 and 4 once more</li>
+
-
                        </ol>
+
-
                        <p class="style18"><u>Prepare plates</u></p>
+
-
                        <ol class="style18">
+
-
                          <li>Use  a cap-less Eppendorf tube (remove it using scissors or a light) to piece  through each of the 2% plugs</li>
+
-
                          <li>Resuspend  the cell pellet using an appropriate volume of 0.3% agar solution to get the  final OD600 to be greater than 0.6.</li>
+
-
                          <li>Aspirate  10ml of the cell-agar solution to a Petri dish, shake to flatter the solution  to cover the whole plate</li>
+
-
                          <li>Before  the gel solidifies, Use a pair of tweezers to place each piece of the “smaller  plug” in the cell-agar solution.</li>
+
-
                          <li>After  the gel has solidified, incubate the plate at 37oC.</li>
+
-
                          <li>Results  should be available after an hour of incubation, incubate longer if necessary</li>
+
-
                        </ol>
+
-
                        <p class="style18">Note</p>
+
-
                        <ul>
+
-
                          <li class="style18">2%  Agar solution solidifies extremely quickly so do practice on the sodium acetate  sample in order to avoid spoiling “collected gel samples”, saving the trouble  of needing to re-collect.</li>
+
-
                          </ul>                      
+
-
                         <p><strong><a name="p11" id="p11"></a>PROTOCOL-11 <em><u>Most Probable Number  method (MPN)</u></em></strong><br />
+
Preparation:</p>
Preparation:</p>
                         <ol>
                         <ol>
Line 566: Line 477:
                           <li class="style18">Fresh medium (liquid or solid)</li>
                           <li class="style18">Fresh medium (liquid or solid)</li>
                         </ol>
                         </ol>
-
                         <p align="center"> <img src="image/protocol_pic3.jpg" width="500" height="250" /><br />
+
                         <p align="center"> <img src="image/protocol_pic3.png" width="500" height="250" /></p>
-
                          Steps:<br />
+
                        <p align="left">Steps:<br />
-
                          (A detailed description of the MPN (Most Probable Number) method can be  found <u>here</u>.)<br />
+
                         </p>
                         </p>
                         <ul>
                         <ul>
Line 578: Line 488:
                           <li class="style18">Record the outcome in the following format, in which 1 represents a  bacteria growth is observed while 0 means not.</li>
                           <li class="style18">Record the outcome in the following format, in which 1 represents a  bacteria growth is observed while 0 means not.</li>
                         </ul>
                         </ul>
-
                         <div align="center"><img src="image/protocol_pic4.jpg" width="500" height="250" /></div>
+
                         <div align="center"><img src="image/protocol_pic4.png" width="500" height="250" /></div>
                         <ul>
                         <ul>
-
                           <li class="style18">Check up the <u>MPN table</u> for the final result. (MPN table for triplicate is also available <u>here</u>.)</li>
+
                           <li class="style18">Check up the <u><a href="http://www.jlindquist.net/generalmicro/102dil3a.html">MPN table</a></u> for the final result.</li>
                         </ul>                        <p>To see our result, please refer to the <u>RESULT</u> part of our wiki.</p>
                         </ul>                        <p>To see our result, please refer to the <u>RESULT</u> part of our wiki.</p>
-
                         <p><strong><a name="p12" id="p12"></a>PROTOCOL-12 <em><u>Bradford assay</u></em></strong><br />
+
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
 +
                         <p><strong><a name="p12" id="p12"></a>PROTOCOL-10 <em><u>Bradford assay</u></em></strong><br />
                           1. Bacteria culturing<br />
                           1. Bacteria culturing<br />
-
                           A 50 mL culture of EColi. was grown in 2%  LB media overnight (16 hours) in 37’C shaker. A fresh 50 mL LB culture was  inoculated with 0.2 mL of these cells and grown for 5 hours to an OD600 between  0.100 and 3.000. The cells were collected with centrifugation (Beckman,  13,000rpm, 2min, rt’C), washed twice with chilled 200 λ PBS Buffer, and  re-suspended in 1mL of chilled PBS Buffer.</p>
+
                           A 50 mL culture of EColi. was grown in 2%  LB media overnight (16 hours) in 37’C shaker. A fresh 50 mL LB culture was  inoculated with 0.2 mL of these cells and grown for 5 hours to an OD600 between  0.100 and 3.000. The cells were collected with centrifugation (Beckman,  13,000rpm, 2min, rt’C), washed twice with chilled 200 λ PBS Buffer, and  re-suspended in 1mL of chilled PBS Buffer.<br />
-
                        <p><br />
+
                           2. Protein quantization<br />
                           2. Protein quantization<br />
                           Sonication Settings:<br />
                           Sonication Settings:<br />
-
                           1,000 uL aliquots of re-suspended bacteria  were transferred to 1.4 mL polyethylene tubes tubes were subjugated to  sonication times of (10”+5”)*10cycles seconds at 40% power (≈4.8 watts/pin). The samples were then centrifuged at 13,000 rpm for  2 minutes to pellet debris. The supernatant containing solubilized proteins was  collected for analysis.<br />
+
                           1,000 μl aliquots of re-suspended bacteria  were transferred to 1.4 mL polyethylene tubes tubes were subjugated to  sonication times of (10”+5”)*10cycles seconds at 40% power (≈4.8 watts/pin). The samples were then centrifuged at 13,000 rpm for  2 minutes to pellet debris. The supernatant containing solubilized proteins was  collected for analysis.<br />
                           Or B-Per protein extraction  kit(recommended):<br />
                           Or B-Per protein extraction  kit(recommended):<br />
                           1000 μL aliquots of re-suspended bacteria  were centrifuged at 13k rpm for 10 min. to pellet cells. The cells were  resuspended in 200 μL of B-Per Reagent (Pierce, Rockford, IL) and vortexed for  1 minute corresponding to the Pierce protocol. 800 μl of PBS buffer was added  to the solution and the solution centrifuged 10min 13k rpm to pellet debris and  the supernatant collected for analysis<br />
                           1000 μL aliquots of re-suspended bacteria  were centrifuged at 13k rpm for 10 min. to pellet cells. The cells were  resuspended in 200 μL of B-Per Reagent (Pierce, Rockford, IL) and vortexed for  1 minute corresponding to the Pierce protocol. 800 μl of PBS buffer was added  to the solution and the solution centrifuged 10min 13k rpm to pellet debris and  the supernatant collected for analysis<br />
                           Protein Assay:<br />
                           Protein Assay:<br />
-
                           The amount of protein released after each  sonication time was qualitatively determined by use of Bradford Reagent. An  aliquot of 10 uL of each sample was mixed with 200 uL of 1:5Diluted Bradford  Reagent and the absorption at 595 nm recorded (CARY300 Bio UV-Visible  spectrometer) after 10~30 minutes of mixing time.</p>
+
                           The amount of protein released after each  sonication time was qualitatively determined by use of Bradford Reagent. An  aliquot of 10 μl of each sample was mixed with 200 μl of 1:5Diluted Bradford  Reagent and the absorption at 595 nm recorded (CARY300 Bio UV-Visible  spectrometer) after 10~30 minutes of mixing time.</p>
 +
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
                         <p>&nbsp;</p>
                         <p>&nbsp;</p>
                         <h3>Other Protocols</h3>
                         <h3>Other Protocols</h3>
Line 605: Line 516:
                           <li class="style18">Pour gel into casting trays. </li>
                           <li class="style18">Pour gel into casting trays. </li>
                           </ol>
                           </ol>
 +
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
                         <p><strong><u><a name="p14" id="p14"></a>Running  agarose gels</u></strong></p>
                         <p><strong><u><a name="p14" id="p14"></a>Running  agarose gels</u></strong></p>
                         <ol start="1" type="1">
                         <ol start="1" type="1">
Line 614: Line 526:
                           <li class="style18">Turn on the power supply and run your gel at ~120 V      for 30 mins. </li>
                           <li class="style18">Turn on the power supply and run your gel at ~120 V      for 30 mins. </li>
                           <li class="style18">Verify that bubbles are rising from the electrodes      once you start your gel to ensure your gel is running properly. </li>
                           <li class="style18">Verify that bubbles are rising from the electrodes      once you start your gel to ensure your gel is running properly. </li>
-
                        </ol>
+
                          </ol>
 +
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
                         <p><a name="p15" id="p15"></a><strong>Marker standard</strong><br />
                         <p><a name="p15" id="p15"></a><strong>Marker standard</strong><br />
                         We use 1kb plus DNA ladder.</p>
                         We use 1kb plus DNA ladder.</p>
Line 623: Line 536:
                           <li class="style18">cool the tube to room temperature </li>
                           <li class="style18">cool the tube to room temperature </li>
                           <li class="style18">Add the solution into the collection tube, standing      for 1 minute,13,000rpm for 1 min, discard the flow-through </li>
                           <li class="style18">Add the solution into the collection tube, standing      for 1 minute,13,000rpm for 1 min, discard the flow-through </li>
-
                           <li class="style18">Add 650 uL WB,13,000rpm for 1 min, discard the      flow-through </li>
+
                           <li class="style18">Add 650 μl WB,13,000rpm for 1 min, discard the      flow-through </li>
                           <li class="style18">Again</li>
                           <li class="style18">Again</li>
                           <li class="style18">13,000rpm for 2 min, discard the flow-through </li>
                           <li class="style18">13,000rpm for 2 min, discard the flow-through </li>
-
                           <li class="style18">Put the collection tube into a clean EP tube, Add 30      uL ddH2O in the center of the collection tube, standing for 5min </li>
+
                           <li class="style18">Put the collection tube into a clean EP tube, Add 30      μl ddH2O in the center of the collection tube, standing for 5min </li>
                           <li class="style18">13,000rpm for 2 min. </li>
                           <li class="style18">13,000rpm for 2 min. </li>
                           <li class="style18">store the DNA solution at -20℃ </li>
                           <li class="style18">store the DNA solution at -20℃ </li>
                           </ol>
                           </ol>
 +
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
                         <p><u><a name="p17" id="p17"></a>PCR  product purifcation</u><br />
                         <p><u><a name="p17" id="p17"></a>PCR  product purifcation</u><br />
according  to <em>QIAprep</em> kit protocol </p>
according  to <em>QIAprep</em> kit protocol </p>
Line 640: Line 554:
                           <li class="style18">13000rpm for 12min. </li>
                           <li class="style18">13000rpm for 12min. </li>
                           <li class="style18">store the DNA solution at -20℃</li>
                           <li class="style18">store the DNA solution at -20℃</li>
-
                        </ol>
+
                          </ol>
 +
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
 +
                        <p>&nbsp;</p>
                         <p><u><strong><a name="p18" id="p18"></a>Count:  Preparation of Competent Cells for electro transformatio</strong></u></p>
                         <p><u><strong><a name="p18" id="p18"></a>Count:  Preparation of Competent Cells for electro transformatio</strong></u></p>
                         <p><strong>Materials</strong></p>
                         <p><strong>Materials</strong></p>
Line 682: Line 598:
                           <li>Add origin volume 1/100 10% glycerol, suspend softly, store at      -80℃.</li>
                           <li>Add origin volume 1/100 10% glycerol, suspend softly, store at      -80℃.</li>
                           </ol>
                           </ol>
 +
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
 +
                        <p>&nbsp;</p>
                         <p class="style18"><u><a name="p19" id="p19"></a>Electro tranformation</u></p>
                         <p class="style18"><u><a name="p19" id="p19"></a>Electro tranformation</u></p>
                         <ol start="1" type="1">
                         <ol start="1" type="1">
Line 696: Line 614:
                           <li class="style18">Bath in 37℃      for 60~90 min.? </li>
                           <li class="style18">Bath in 37℃      for 60~90 min.? </li>
                           <li class="style18">Separate      cells on petri-dishes, and cultivate them in 37℃      for 12 hour.</li>
                           <li class="style18">Separate      cells on petri-dishes, and cultivate them in 37℃      for 12 hour.</li>
-
                        </ol>
+
                          </ol>
 +
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
 +
                        <p>&nbsp;</p>
                         <p align="left"><u><strong>Ligation</strong></u><br />
                         <p align="left"><u><strong>Ligation</strong></u><br />
                           W<span class="style18">e use new England Biolabs T4 DNA  ligase </span></p>
                           W<span class="style18">e use new England Biolabs T4 DNA  ligase </span></p>
Line 707: Line 627:
                           <li class="style18">Begin <a href="http://www.openwetware.org/wiki/IGEM:Peking/2007/Transformation" title="IGEM:Peking/2007/Transformation">transformation</a>. </li>
                           <li class="style18">Begin <a href="http://www.openwetware.org/wiki/IGEM:Peking/2007/Transformation" title="IGEM:Peking/2007/Transformation">transformation</a>. </li>
                           </ol>
                           </ol>
 +
                        <p><span class="style18"><a href="#top">[Back to Top]</a></span></p>
 +
                        <p>&nbsp;</p>
                         <p align="left"><u><a name="p20" id="p20"></a>DNA extraction</u><br />
                         <p align="left"><u><a name="p20" id="p20"></a>DNA extraction</u><br />
                         Use QIAGEN kit</p>                         
                         Use QIAGEN kit</p>                         
Line 743: Line 665:
                           28cycles <br />
                           28cycles <br />
                           5. 72℃ 10min add A at the end of each fragment </p>
                           5. 72℃ 10min add A at the end of each fragment </p>
 +
                        <p align="left"><span class="style18"><a href="#top">[Back to Top]</a></span></p>
 +
                        <p align="left">&nbsp;</p>
                         <p align="left"><u><strong><a name="p22" id="p22"></a>Plasmid digestion</strong></u><br />
                         <p align="left"><u><strong><a name="p22" id="p22"></a>Plasmid digestion</strong></u><br />
                           <strong>Digestion temperature</strong><br />
                           <strong>Digestion temperature</strong><br />
Line 765: Line 689:
1 hour enables a test digestion. If digestion is used for cutting  vectors and PCR fragments, in order to digest thoroughly, about 16 hours is a  relatively good choice. However, some endonuclease used in the digestion system  inactivates quickly. So we need add new enzymes at intervals during digestion. <br />
1 hour enables a test digestion. If digestion is used for cutting  vectors and PCR fragments, in order to digest thoroughly, about 16 hours is a  relatively good choice. However, some endonuclease used in the digestion system  inactivates quickly. So we need add new enzymes at intervals during digestion. <br />
Refer to the form of different endonuclease about their remaining  activity after different periods of time. </p>
Refer to the form of different endonuclease about their remaining  activity after different periods of time. </p>
 +
                        <p align="left"><span class="style18"><a href="#top">[Back to Top]</a></span></p>
 +
                        <p align="left">&nbsp;</p>
 +
                        <p align="left">&nbsp;</p>
                         <p>&nbsp;</p></td>
                         <p>&nbsp;</p></td>
                         <td width="10%">&nbsp;</td>
                         <td width="10%">&nbsp;</td>

Revision as of 19:44, 28 October 2008

 

Protocols

Content:

Novel Protocols

Regular Protocols

Other Protocols

 

 

 

 

Novel Protocols

PROTOCOL-1 Pattern formation

Day1--Inoculation

  1. Inoculate single colony into a 5ml LB with antibiotics into a Sterilin 20cm3 tube. Incubate in 37oC rotor at medium or maximum rotational speed.

Day2--Soft Agar Plate Preparation

  1. Weigh LB broth with accuracy to 3 decimal places. Prepare a master 2% LB of desired volume in a Pyrex bottle.
  2. Weigh BactoAgar with accuracy to 3 decimal places. If BactoTMAgar is used, add 0.3g per 100ml of LB. If Difco Agar is used, add 0.45g per 100ml of LB.
  3. Add to a Pyrex bottle (autoclavable) the agar and the appropriate LB solution to dissolve the agar.
  4. Autoclave the LB agar, then place the LB agar into a 55oC before it solidifies.
  5. Leave the LB agar to cool to 55oC for at least half an hour.
  6. Add glucose, IPTG (v/v) 1:1000, antibiotics (v/v) 1:1000 (if applicable) into LB agar. Mix well.
  7. Aspirate 10cm3 of LB agar for each Petri dish, shake the plate to flatter the solution across the whole plate
  8. Wait for at least one and a half hour before adding cells to the plate.

preculture for pattern development on Soft Agar Plate

  1. Add 2ml LB with appropriate antibiotics to a Falcon 10ml preculture tube.
  2. Add 40ul of the inoculation sample (dilution rate 1:50) to the tube.
  3. Place tubes in 37oC shaking incubator until OD600 reaches 0.8 - 1.0.
  4. Add 2ul of the cell culture to the centre of a soft agar plate.
  5. Gently place the plates in 37oC and incubate overnight (12 – 19 hrs).

<Note>

  1. Use fresh plate, do not use plates prepared the day before since water evaporates out from the plate and will cause the cells to swarm on the surface.
  2. Glucose & Arabinose can be stored in room temperature but best is to store it in 4oC.

[Back to Top]

PROTOCOL-2 Picture capture

Preparation:

  1. Light source: lamp
  2. Frame: card-board box (e.g.with size37cm*28cm*22cm)
  3. Background curtain: light-absorb cloth
  4. Picture capture device: web camera
  5. Computer: desktop all laptop

Location: warm room (37 ℃)
Device setting: (Fig.1.)
The lamp should be fixed on the wall with its light shooting directed to the wall. The reflected light will then enter the dark box with the light-absorb cloth wrapped inside. Drill hole(s) on the top of the box whose size is fit for the camera lens. A box of our size can hold up to 4 web cameras to take picture simultaneously.
The light-absorb cloth is simply stapled to the inside wall of the card-board box. It will largely reduce the light refraction inside the dark box as well as give a high contrast background to the bacteria pattern which is white in observation.
(If the light intensity is still too high, a piece of normal A4 paper or paper tissue can be used as a mask on the open side of the box.)

Picture capturing:
Software used for monitoring and capturing pictures may be differed from various web cameras made from different companies. Since the web camera we purchased is a product of Vimicro, we basically used their software Vimcam (which can be found here) for the analysis.

Since we may want to take picture for the same plate repetitively in a fixed time interval and a long time duration, we used a automatic approach with the help of a simple Java program. (You can find the Java code and a simple description here) The Java program is will simulate a robot who will click and release the left mouse button for a given time interval and this program will stop after a certain time duration.

[Back to Top]

PROTOCOL-3 Brightness cell concentration relationship Measurement

Day 1 –Streak the strand of cells to be tested on agarose plate to form single colony

Day 2 – Start seed culture

  1. Morning: inoculate a single colony of cells (or from a patch amplified from a single colony) into X ml LB. Incubate on shaker at 250 rpm at 37oC

Day 2 – Start pre-culture before leaving
2) Afternoon or evening: centrifuge the LB seed culture at RT; drain the medium as clean as possible; resuspend the cells with the culture medium using conical flusk with as large volume as possible, I liter or 500 ml flusk is recommeded (it’s better to centrifuge and resuspend for another time); measure OD; inoculate the seed cells into 1/4 the flusk volume’s (exp, 250ml for 1 liter flusk) minimal medium (2% LB medium)

Day 3 – Start experimental culture after arriving

  1. Morning: Prepare 200 ml LB-Agar with 2% LB and 0.8% Agar and autoclave, put on 50oC water bath to keep it in liquid form.
  2. Centrifuge the pre-culture at RT; drain the medium as clean as possible; resuspend the cells into 100 ml culture medium (2% LB medium), shake it on votex to make sure cells are separated thoroughly and unified throughout the medium, measure OD(if OD is much higher than 1, then dilute with power of 2 and measure).
  3. Prepare several clean 20 ml tubes. Pull 10 ml bacteria LB-Agar mixture with cell concentration gradient onto plates
    • Add different volume of bacteria into 20 ml tubes. (exp: 1ml, 2ml, 3ml, 4ml, and 5ml)
    • Add 2% LB medium to the 20 ml tube to fill the solution to 5 ml
    • Add 5 ml of LB-Agar and pull plate sequentially.

After the mixture, the Agar Concentration will become 0.4%, which equals to the agar concentration where cells can swim into the gel, and contain different concentration of cells.

    • Fix a plate cover below the camera, then place the plates upside down on the cover in order to keep position fixed, and take photos one by one.
    • Measure the average brightness of each plate.

    [Back to Top]

PROTOCOL-4 Migration rate measurement

Day 1 –Streak the strand of cells to be tested on agarose plate to form single colony

Day 2 – Start seed culture

  1. Morning: inoculate a single colony of cells (or from a patch amplified from a single colony) into X ml LB. Incubate on shaker at 250 rpm at 37oC
  2. Prepare 100 ml LB-Agar with 2% LB and 0.4% Agar and autoclave, put on 50oC water bath to cool down, and pull plate.

Day 2 – Start experimental culture

  1. Afternoon or evening: centrifuge the pre-culture ar RT; drain the medium as clean as possible; resuspend the cells with the culture medium (it’s better to centrifuge and resuspend for another time); measure OD; When it is below 1.000 inoculate the pre-culture cells into 5 ml minimal medium
  2. When OD reaches 1.000, use pipette to drop 2 μl bacteria solution onto the centre of the prepared plate.
  3. Rotate the plate upside down and fix it below the camera, use automatic Photo taking to capture Cell migration status over-night.

Day 3 – Collect data

  1. Afternoon: 24 hours after photo taking, retrieve the image data and measure the brightness of whole plate along time course to analyze the migration rate.

[Back to Top]

PROTOCOL-5 Harvest sample from agar plate

  1. Culture of the E.coli on the 35mm petradish
    1. Measure the OD600 of the cells
    2. Autocleave the LB–agar and let it cool down to 42’C in water bath
    3. Mix the cells with the agar to a final concentration of OD600 0.01
    4. Pipet 1ml mixture into each 35mm petradish
    5. Let grow at 37’C
  2. Harvest the agar from the petradish
    1. Remove the agar from the plate completely with the spoon made of soft plastic(refer to the photo attached)
    2. Wash the plate with 0.5ml PBS?
    3. The agar and the washing PBS is to be collected into the 1.5mL epindoff tubes?

<Note>

  • Cool the agar to 42’C before mix it with cell otherwise the cell will be killed.
  • Cool the plated agar to the room temperature before put into warm room; otherwise the solidification of the agar will be prolonged.
  • While culturing, the plates should not be piled up vertically, otherwise the temperature will be lower for the plates in the middle, which will result in slow growth.
  • All agars should be transferred to the tubes for the accuracy of later measurement.

[Back to Top]

 

Regular Protocols

PROTOCOL-6 β-galactosidase assay
1. Sample treatment
a) Harvest the culture by centrifuge (13krpm*1.5min) followed by washing with 1ml PBS twice
b) Resuspend the pellet with PBS and protease inhibitor cocktail.
c) Sonication for (5.5seconds+1second pulse)*10 minutes
d) Centrifuge (13krpm * 1min)
2. ONPG enzymatic reaction
a) Aliquot 200 microliter of treated sample into the 96 wells plate
b) Add 40 microliter of ONPG(4mg/ml in ddw) into each well
c)Read the OD420 every 10minutes for 5 minutes at 37’C on the spectrometer
3. Trouble shooting
a) Raw reading beyond most accurate region of o.2~0.4
b) Loss of activity due to high temperature or malfunction of the protease inhibitor
c) Incomplete cell lysis because too short sonication time or incomplete resuspension of the pellet
d) The temperature for the enzymatic reaction should be 37’C, so the spectrometer should be prewarmed.
<Note>
Must keep the sample at low temperature to avoid the loss of enzymatic activity.

[Back to Top]

PROTOCOL-7 Western blot

  • Buffer preparation
    1. Rususpension buffer: 1ml stock + 0.1ml protease inhibitor (10x)
    2. Loading buffer: 1ml stock + 0.2 ml DTT + Phenol Blue
  • Sample treatment
    1. centrifuge the culture into pellet (13k rpm 10min)
    2. Resuspend the pellet with 5xVolume(pellet) Resuspension buffer
    3. Add 5xVolume(pellet) loading buffer
    4. Boil the resuspend for 10 minutes at 100’C
    5. Centrifuge for 1 min at 13krpm
  • SDS-PAGE
    1. 15% separation gel
    2. 5% stacking gel
    3. Load the sample and run under the constant voltage of 100V
  • Western blotting
    1. Transfer from gel to membrane
    2. Assemble "sandwich" Transblot.
    3. Prewet the sponges, filter papers (slightly bigger than gel) in 1x Blotting buffer.
    4. Transfer for 1 hr at 1 amp at 4°C on a stir plate. Bigger proteins might take longer to transfer. For the Mini-Transblot, it's 100 V for 1 hr with the cold pack and prechilled buffer. When finished, immerse membrane in Blocking buffer and block overnight.
  • Hybridization with antibodies
    1. Incubate with primary antibody diluted in Blocking buffer for 60 min at room temp.
    2. Wash 3 x 10 min with 0.05% Tween 20 in PBS.
    3. Incubate with secondary antibody diluted in PBS for 45 min at room temp.
    4. Wash 3 x 10 min with 0.05% Tween 20 in PBS.
    5. Detect with SUPER SIGNAL WEST PICO Kit (1ml luminol solution + 1ml stable peroxide solution
  • Result analysis
    • The size of the tagged protein can be determined by the marker (protein ladder)
    • The amount of the protein can be estimated by the brightness of the band, or accurately analysed by the software.
  • Trouble shooting
    1. Unspecific binding : 1st antibody-membrane and irrelevant protein to 1st antibody
    2. Film over-exposure or lack of exposure

[Back to Top]

PROTOCOL-8 Recombineering
The procedure used was similar to that described by Watt et al (Ref). About 500 μl from overnight cultures [5 ml L medium (containing antibiotic where applicable) inoculated from single colonies, grown at 32°C for 18 h] was expanded into 50 ml of L medium in a 250 ml Erlenmeyer flask, and incubated at 32°C for 2 h (until OD600 of ca. 0.4–0.6). Flasks were transferred to a shaking water bath at 42°C and incubated for 14–15 min, before cooling to 0°C as rapidly as possible in iced water. After 15–20 min, cells were harvested by centrifugation at 0°C (4000 g, 9 min). Cell pellets were carefully washed three times with sterilized ice-cold water (2 × 50 ml, then 1 × 1.5 ml) then re-suspended in 100–200 μl of ice-cold water. Competent cells (50 μl) were transformed with 50–200 ng of (gel purified) linear dsDNA targeting cassette using a BioRad electroporator (1.8 kV, 25 mF, 200 W). The L medium (1 ml) was added to the transformed cell mixture, which was incubated at 32°C, for 2–2? h. Cells were collected by centrifugation, ca. 900 μl of supernatant media was discarded, and then the resuspended cells were plated onto LB agar containing the appropriate antibiotic to select for resistant colonies.

[Back to Top]

PROTOCOL-9 Most Probable Number method (MPN)
Preparation:

  1. A original undiluted cell culture sample (> 1ml)
  2. Distilled water
  3. Vortex**
  4. OD600 reader
  5. Fresh medium (liquid or solid)

Steps:

  • Measure and record the OD600 value of the original undiluted sample.
  • Shake the sample thoroughly and draw 100μl into a new tube which contains 900μl water. Mark the new tube with 1.
  • Repeat step 2 for several times according to the OD600 value which have been recorded. Every time dilute the previous sample 10 times and mark the new sample in an ascending order, i.e. 2, 3, 4… (Since it is commonly believed that there are around 109 cells in 1ml sample with OD600 measured 1.00, if this sample is used, loop for 9 or 10 times is needed)
  • Up to this step, a series of diluted samples should be obtained. Every time draw 100μl from the sample and drop it on a plate. For every sample, repeat this procedure for 5 separate plates.
  • Incubate the plates over night, at 37℃.
  • Record the outcome in the following format, in which 1 represents a bacteria growth is observed while 0 means not.
  • Check up the MPN table for the final result.

To see our result, please refer to the RESULT part of our wiki.

[Back to Top]

PROTOCOL-10 Bradford assay
1. Bacteria culturing
A 50 mL culture of EColi. was grown in 2% LB media overnight (16 hours) in 37’C shaker. A fresh 50 mL LB culture was inoculated with 0.2 mL of these cells and grown for 5 hours to an OD600 between 0.100 and 3.000. The cells were collected with centrifugation (Beckman, 13,000rpm, 2min, rt’C), washed twice with chilled 200 λ PBS Buffer, and re-suspended in 1mL of chilled PBS Buffer.
2. Protein quantization
Sonication Settings:
1,000 μl aliquots of re-suspended bacteria were transferred to 1.4 mL polyethylene tubes tubes were subjugated to sonication times of (10”+5”)*10cycles seconds at 40% power (≈4.8 watts/pin). The samples were then centrifuged at 13,000 rpm for 2 minutes to pellet debris. The supernatant containing solubilized proteins was collected for analysis.
Or B-Per protein extraction kit(recommended):
1000 μL aliquots of re-suspended bacteria were centrifuged at 13k rpm for 10 min. to pellet cells. The cells were resuspended in 200 μL of B-Per Reagent (Pierce, Rockford, IL) and vortexed for 1 minute corresponding to the Pierce protocol. 800 μl of PBS buffer was added to the solution and the solution centrifuged 10min 13k rpm to pellet debris and the supernatant collected for analysis
Protein Assay:
The amount of protein released after each sonication time was qualitatively determined by use of Bradford Reagent. An aliquot of 10 μl of each sample was mixed with 200 μl of 1:5Diluted Bradford Reagent and the absorption at 595 nm recorded (CARY300 Bio UV-Visible spectrometer) after 10~30 minutes of mixing time.

[Back to Top]

 

Other Protocols

Casting agarose gels

  1. Assemble casting trays, gel box and gel comb, choose the comb of appropriate width, size, and number into niche at end of the tray.
  2. agarose solution(1% gel):0.4g agarose + 40ml 1X TAE for small gels or 1g agarose + 100ml 1X TAE for large gels.
  3. add agarose solution in a 500ml beaker.
  4. Microwave bottle for 5min
  5. Remove from microwave and let cool
  6. Once gel is cooled so that it can be touched comfortably with your gloved hand, add 4μL(for small gel) or 10 μL(for large gels) EB dye.
  7. Pour gel into casting trays.

[Back to Top]

Running agarose gels

  1. Place the gel in gel box.
  2. Add enough 1X TAE to fill the reservoirs at both ends of the gel box and cover the surface of the gel--the gel should be immersed.
  3. Mix6Х loading dye with samples: Typically, use 1 μL loading dye per 5 μL of sample.
  4. Load samples left to right.
  5. Place gel box cover on gel box such that your samples will run towards the positive, red electrode. Make sure that the cables from the cover are connected to the power supply correctly.
  6. Turn on the power supply and run your gel at ~120 V for 30 mins.
  7. Verify that bubbles are rising from the electrodes once you start your gel to ensure your gel is running properly.

[Back to Top]

Marker standard
We use 1kb plus DNA ladder.

Quick gel purifcation
according to QIAprep kit protocol

  1. Agarose gel electrophoresis, cut the DNA band as thin as possible.Then put it into a clear EP tube. weighing,if the weight is 100mg,the volume can be considered as 100uL,add QG beffer,put into 55℃ water bath until complently merge, it takes about 10 minutes
  2. cool the tube to room temperature
  3. Add the solution into the collection tube, standing for 1 minute,13,000rpm for 1 min, discard the flow-through
  4. Add 650 μl WB,13,000rpm for 1 min, discard the flow-through
  5. Again
  6. 13,000rpm for 2 min, discard the flow-through
  7. Put the collection tube into a clean EP tube, Add 30 μl ddH2O in the center of the collection tube, standing for 5min
  8. 13,000rpm for 2 min.
  9. store the DNA solution at -20℃

[Back to Top]

PCR product purifcation
according to QIAprep kit protocol

  1. Take 100uL PCR product solution, add 5 times volume Binding Buffer,mix, add into spin column, standing for 2 min, 13000rpm for 1 min,discard the flow-through.
  2. Add 650 mL buffer WB ,13000 rpm for 1min,discard the supernatant
  3. Again
  4. 13000rpm for 2 min to wipe out the remaining WB
  5. Put the collection tube into a clean EP tube, Add 50uL 60 ℃ddH2O in the center of the collection tube, standing for 15min
  6. 13000rpm for 12min.
  7. store the DNA solution at -20℃

[Back to Top]

 

Count: Preparation of Competent Cells for electro transformatio

Materials

  1. Media
    1. LB(Both liquid media and media containing agar. Add certain antibiotic if it is necessary.);
  2. Buffers and Solutions

10% Glycerin.

  1. Special Equipments
    1. EP tubes(1.5mL), micropipette tips, centrifugation bottles(polypropylene tubes, 50mL), graduated flask(250mL*2, 5mL*1), plates and test tubes.

Protocol

  1. Sterilization
    1. Including all materials in part2.
    2. Caution (Remind): use some special marks to distinguish the sterilized materials from the unsterilized ones.
  2. Preparation after sterilization
    1. Chill the 10%Glycerin to 4 centigrade degree
    2. Decant LB containing agar into the plates.(If antibiotics are necessary, be sure that they are added when the media temperature is below 60 centigrade degree.)
  3. Streak the prepared strains onto the agar plates. Then incubate it at 37℃ for 10-16 hours.
  4. overnight preculture
  5. take? 0.5mL overnight culture to 50mL LB bottle.
  6. 37℃ shaking 100~120 min to O.D. 600=0.45~0.6
  7. on ice for 30min
  8. 4000rpm 7min at 4℃
  9. Add origin volume 10% glycerol,suspend softly.
  10. 4000rpm7 min at 4℃
  11. Add origin volume 10% glycerol,suspend softly.
  12. Add origin volume 1/10 10% glycerol, suspend softly.
  13. 4000rpm7 min at 4℃
  14. Add origin volume 1/100 10% glycerol, suspend softly, store at -80℃.

[Back to Top]

 

Electro tranformation

  1. Hold competent cells (from -80℃ refrigerator) on ice.
  2. Gently mix ligation product (1-5 μL) with cells.
  3. transfer the cell/DNA mix into an electroporation cuvette
    Note: the gene pulser should already be set properly
    - time constant = 4.5 - 5.0 ms
    - resistance = 200 W
    - capacitance = 25 mFD
    for 0.1 cm gap cuvettes, set the volts to 1.7 kV
  4. pulse the cells once; the voltage display blinks, and the gene pulser beeps
  5. quickly transfer 37 ℃ SOC to cuvette, mix by gently pipetting up and down, and transfer SOC/cells back to culture tube
  6. Bath in 37℃ for 60~90 min.?
  7. Separate cells on petri-dishes, and cultivate them in 37℃ for 12 hour.

[Back to Top]

 

Ligation
We use new England Biolabs T4 DNA ligase

  1. Choose reaction volume: 5-10 μL
  2. Mix proper proportion (usually 3~5:1) of DNA fragment and vector.
  3. Add 10×(meaning 1/10 of final volume) ligase buffer.
  4. Add 0.5 μL ligase per 10 μL final volume.
  5. Bath in 16℃ water for 12 hour,
  6. Begin transformation.

[Back to Top]

 

DNA extraction
Use QIAGEN kit

Polymerase Chain Reaction
Choose enzymes
1.We use rTaq in testing but not in cloning genes.
2.Ex Taq and LA Taq are modified Taq by Takara, they have 3’->5’exonuclease activity and a relatively high fidelity.
3.Generally speaking, genes shorter than 1000bp can be cloned by Ex Taq. Genes shorter than 1.5kb can be cloned by LA Taq.
4.Taq can add A at the end of each fragment, so their PCR product can direcly link to T plasmid.
PCR system
Normal Taq polymerase reaction component has a template of 1ng~1ug, dNTP 200uM each,primer 50pmol each,polymerase 1U,buffer and water。Template can be plasmid,colony and genomic DNA.
Taq series polymerase reaction components
Colony PCR
Template:Bacterial Colony
10×PCR rTaqbuffer 2uL
10×dNTP 1.6uL
Primer-F 0.1uL
Primer-R 0.1uL
rTaq 0.2uL
ddH2O 16uL
20uL system
Cloning
Template 1uL (above 10ngDNA)
10×PCR buffer(Ex/LA) 5uL
10×dNTP 4uL
Primer-F 1uL
Primer-R 1uL
Ex/LA Taq 0.25uL
ddH2O 37.75uL
50uL system
reaction condition
1.95℃ 5min Taq enzyme activation by heat
2.95℃ 30s DNA denaturing
3.Tm-5~10℃ 30s Tm is annealing temperature, with a range of 45~60℃
4. 72℃ ETs ET is elongation time,1kb/min
28cycles
5. 72℃ 10min add A at the end of each fragment

[Back to Top]

 

Plasmid digestion
Digestion temperature
Most endonuclease has the optimal activity temperature of 37℃.
enzymatic system
Includs plasmid/PCR product, enzyme, buffer and water, sometimes with BSAin it. The system for enzymatic test should be no more than 20uL. The system for recruiting vectors and fragments should be 50-100uL.
DNA concentration in digestion system
The vector concentration should be no more than 1ug, PCR fragment concentration should be no less than 1ug.
Star activity
Some endonuclease will have a less specific substrate selection under certain conditions. It will cut different sequences from original recognitions. This is called star activity.
In order to reduce the star activity, glycero concentration should not be too high and DNA concentration should not be too low. In the storage of enzyme there is glycerol. So the maximal amount of enzyme added in a system should be 10%, especially for enzymes with star activities.
The influence of Methylation
Some endonuclease activity will be affected by methylation of DNA.
There is a methylation form we can refer to.
Terminal digestion of PCR product
The terminal digestion always has a low efficiency. Some additional base pairs are always added at the end of PCR product during primer design in order to improve the digestion efficiency.
There is a form about PCR terminal digestion.
Inactivation
After the digestion, endonuclease must be inactivated before applied to ligation system. Different enzymes have different inactivation condition.
There is a form about inactivation conditions of all usual endonuclease.
Digestion Timing
1 hour enables a test digestion. If digestion is used for cutting vectors and PCR fragments, in order to digest thoroughly, about 16 hours is a relatively good choice. However, some endonuclease used in the digestion system inactivates quickly. So we need add new enzymes at intervals during digestion.
Refer to the form of different endonuclease about their remaining activity after different periods of time.

[Back to Top]