Template:Team:UC Berkeley/Notebook/MJV notes

From 2008.igem.org

Revision as of 09:16, 23 June 2008

Madhvi 05:43, 4 June 2008 (UTC)

Yesterday we talked about biobricks and cloning. Today we talked about assembly, BBb standard, and documentation. We also discussed our project plan today. In our demos, we run a PCR yesterday to amplify GFP from a plasmid. Today, we did a zymo cleanup, a restriction digest, and ran an analytical gel (E-gel).

I set up my notebook today and I am looking at papers to try to find a good choice of protein for the protein purification part of the project. I am also trying to find growth-phase dependent promoters.

Madhvi 05:08, 12 June 2008 (UTC)

Last week, I didn't really find anything regarding a good choice of protein, but I did find the rrnB P1 promoter that robustly turns off when cells enter the stationary phase. I also designed the oligos for my basic parts (variations of Cre, ligase, BglII, BamHI and the rrnB P1 promoter). Construction files for these parts (K112100-K112121) are included in the construction files section of my notebook. All of my oligos have not yet come in. They should be in tomorrow and I should be able to run PCRs tomorrow.

In the meantime, I have been doing a few things to determine the assay conditions for the Gateway reactions. On Friday and Monday, Jin and I made concentrated stocks for the six parts of the Gateway buffer (1M Tris pH 7.4, 5M NaCl, 1M Spermidine, 0.5M EDTA pH 8.1, 50mM DTT, 10 mg/mL BSA). Yesterday, I mixed appropriate volumes of them to make 10mL of a 1x Gateway Buffer (22mM Tris, 100mM NaCl, 7mM Spermidine, 5mM EDTA, 2mM DTT, 1mg/mL BSA) and stored it at 4 degrees. Jin says it should be stable for approximately one week.

Today, Jin and I ran the regular clonase reaction with pBjh1600 (RFP entry vector with p15a origin) and pBjh1601CK (CK assembly vector with p15a origin). The reaction is set up with 0.6uL EB Buffer (Dilute Tris), 0.3uL Assembly vector miniprep, 0.3uL Entry vector miniprep, and 0.3uL LR Clonase II. We also ran this reaction (usually 1.5uL) scaled up to 10uL by adding 8.5uL of 1x gateway buffer. We transformed both products into DH10B and plated on KC plates after 1hr. reaction time. We will compare the number of colonies on both plates tomorrow.

I also am growing up cultures two cultures which we will use tomorrow for a Gateway reaction after arabinose induced lysis. The first culture is TG1 (ccdB immune strand) with pSB3C6-Bjh1311 (holin, antiholin and lysozyme under Pbad promoter; p15a origin), pHA57 (xis, int; high copy number, temp. sensitive origin of replication), and pBjh1600. The second culture is TG1 with pSB3C6-Bjh1311, pHA57, and pBjh1601AK. We will mix given amounts of the two culture, wash and resuspend in our 1x gateway buffer and then lyse with arabinose. We will transform the resulting reaction mixture into DH10B and if the reaction was successful we should see colonies on AK plates.

I am also growing up cultures of Righty and Lefty cells to make competent cells that I can use to make my BamHI and BglII basic parts.

Madhvi 08:02, 17 June 2008 (UTC)

Thursday, I made Righty and Lefty competent cells. When I checked the plates from the Gateway reactions that we ran, I saw only a couple of colonies on the plate where the reaction was scaled up and a lot of colonies on the other plate. So, it looks like the reaction does not really work when scaled up to 10uL. Chris thinks that we need to find more information about the appropriate buffer solution and we need to screen different potential buffer solutions to find one that works.

My oligos also came in on Thursday, so I started running PCRs. Because we couldn't find the templates for the BglII, Cre and BamHI experiments, I ran the PCRs on MG1655 and T4 genomic DNA to clone the rrnB P1 promoter and parts of ligase (used program 55). However, none of the reactions worked. So, on Friday, I tried running the MG1655 PCR with & without DMSO as well as the ligase PCRs and the BamHI PCRs without DMSO (on program 55). The only thing that worked was the MG1655 PCR with DMSO. On Friday, I also transformed appropriate templates into Righty and Lefty cells [pBca9145-Bca1010 (Cre) into Righty, pBca9145-I716210 (BamHI) into Righty and BglII with a promoter into Lefty]. I also did test transformations of BamHI and BglII into the Righty and Leffty competent cells that I made in order to confirm that they were correct (which they were).

On Saturday, I grew up colonies from the plates that I made in order to be able to isolate template. However, the Amp media that I used appeared to be lethal, so I did not have cultures on Sunday. I grew up cultures again on Sunday in new Amp media and was able to miniprep and run PCRs on the Cre and BglII templates today.

In the meantime, did PCRs on the BamHI and ligase parts on Saturday with DMSO at 55. I succeeded in amplifying the first three segments of ligase and in getting products for {r.BamHI!}, {r.BamHI>}, and {<r.BamHI>}. Since the bands for the BamHI parts on the gel were quite faint, I used them as templates on Sunday to amplify them more (I ran these reactions at 55 with DMSO). I also did a SOEing reaction with the first two segments of ligase at 55 with DMSO. I tried to clone the {a~r.BamHI!} and {rbs.r.BamHI!} parts using {r.BamHI!} as a template by running these reactions with & without DMSO at 45. I also tried cloning the 4th fragment on ligase with and without DMSO at 45. I found the the {r.BamHI!} template was impure so the resulting reactions had a lot of background and the products were difficult to resolve on the gel. However, the {r.BamHI>} and {<r.BamHI>} reactions looked good and gave well-defined bright bands. Furthermore, the 4th segment of ligase was successfully amplified both with and without DMSO. The SOEing reaction with the first two segments of ligase was also successful.

Today, I reran the {r.BamHI!} (55 w/ DMSO), {a~r.BamHI!}, and {rbs.r.BamHI!} (both 45 with and without DMSO) PCRs using {r.BamHI>} as a template. I also ran the SOEing reaction with the third and fourth segments of ligase with DMSO at 55). I also ran all of the BglII and Cre reactions with the templates that I miniprepped from my cultures.

Madhvi 03:02, 19 June 2008 (UTC)

All of the PCRs worked except for the SOEing reaction of the third and fourth segments of ligase. So, I went ahead with the next cloning steps (digestion, ligation, and transformation) yesterday. Today, I got colonies on all of my plates except the {r.BamHI>} plate. I will redo the ligation & transformation for this one sample tomorrow. I grew up colonies from all of the other plates today, so that I can miniprep and send them in for sequencing tomorrow. Since the SOEing reaction for the third and fourth segments of ligase didn't work yesterday, I reamplified the third region of ligase and segment E (combination of first and second regions) in a PCR that Christie set up for me yesterday evening. I used the reamplified part C to run SOEing reactions of C & D at both 45 & 55 with and without DMSO. The SOEing reaction worked at 55 without DMSO, so I used the resulting fragment (F) as a template along with fragment E to run the final SOEing reaction for ligase. I will see how it works tomorrow!

Madhvi 02:12, 20 June 2008 (UTC)

The ligase PCR worked with 2K45 w/o DMSO! yay! So, now that gave me the {rbs.ligase!} part. I digested that today and ligated it with the new stock of the digested parent vector that Molly, Aron, and Bing made and purified. I also ligated {r.BamHI>} because that plate had no colonies on it yesterday. I transformed both of the samples into Righty cells and plated. Bing miniprepped all of the samples that I grew up yesterday and sent them out for sequencing.

Jin found another paper that described a slightly different buffer mix for the gateway reaction. We will test it tomorrow using the two strains that have the arabinose induced lysis device, along with an entry/assembly vector, and the vector to make xis and int (TG1 with pSB3C6-Bjh1311, pHA57, pBjh1600 and TG1 with pSB3C6-Bjh1311, pHA57, pBjh1601AK). I grew up these two strains in ACSpec and ACK media, respectively.

Today, Chris presented to us about Adobe Illustrator and I met with Susanna Spiro (from COE), Marlee, and Nade about the blog today. We should be starting that next week.

Madhvi 08:10, 23 June 2008 (UTC)

Friday was a long and eventful day. I got about 20-25 colonies on the {rbs.ligase!} plate and 8 colonies on the {r.BamHI!} plate. Chris helped me run a colony PCR on 8 of the ligase colonies to screen them and make sure that the part that they had was the right size. Basically, each colony was picked swirled around in the appropriate PCR tube then put into a well with LB on a 24 well block. The PCR was run with the standard forward and reverse oligos for BBb Biobrick parts (ca998 and g00101). Out of the 8 clones screened, clone #2 had the wrong part (it was ~1000bp instead of ~1500bp). All of the other clones appeared to be correct on the gel that was run.

I also got back sequencing results. All five of the BglII parts were perfect. All five of the Cre parts were perfect partials--I told Jin to ask them to sequence all five of them with the standard reverse oligo (g00101) so that I can check the last 300bp of each of the Cre parts. The rrnB P1 promoter had a perfect sequence. Out of the four BamHI parts that were sequenced, two of them ({r.BamHI!} and {rbs.r.BamHI!}) were bad reads. {a~r.BamHI!} had a huge deletion in the middle of the part. {<r.BamHI>} had a point mutation, which was not silent. I re-picked colonies for all of the BamHI parts on Friday so that they could be miniprepped and sent for sequencing on Saturday. Jin suspected that the BamHI template that I used (pBca9145-Bjh0029) was bad, so I also set up PCRs using pBca9145-I716210 as template for all of the BamHI parts. I went ahead and set them up at 55 w/ & w/o DMSO and at 45 w/ & w/o DMSO.

On Friday, Jin and I also screened 15 buffers using the cultures that I grew up on Thursday for the Gateway reaction with arabinose-induced lysis. Christie used the stock solutions to make the new variation of the Gateway buffer. The buffers that we screened were: the variations of the Gateway buffer that we had made, NEB1, NEB2, NEB3, NEB4, Expand 2, Expand 3, Phusion GC, Phusion HF, & Fast Digest. Chris had screened many of these by scaling up the clonase reaction, but he got inconclusive results (many of them had both red and white colonies) because the clonase that we have has probably gone bad.

The protocol that we used for the experiment involved doing the following for each sample:

1. Mix 300uL of each culture in Eppendorf

   Centrifuge using maximum speed for 30 sec

   Discard supernatent & remove residual liquid using pipette

   Resuspend in 100uL of 1x buffer

   Centrifuge using maximum speed for 30 sec

   Discard supernatent & remove residual liquid using pipette

   Resuspend in 100uL of 1x buffer

   Add 1uL of 20% arabinose

   Incubate at 37 degrees for 1 hour

   Incubate for 1 hour at room temperature

   Centrifuge using maximum speed for 30 sec

   Transform 10uL of the supernatent into 45uL of Righty cells

   Rescue with 50uL of 2YT and incubate for 1 hour at 37 degrees

   Plate on AKG plates

After incubating 1 hour at 37 degrees with arabinose, the samples in Expand 3, Gateway Buffer #1 (the one I made originally) and Phusion HF showed apparent lysis (they were viscous when tested with a pipette). Anyway, none of the plates had colonies on them on Saturday. Jin feels that there might be something wrong with the expression of xis and int from the cells, which would explain why none of the reactions worked.

On Saturday, I found that the PCRs for the BamHI parts all worked at 55 w/o DMSO. So, I went ahead and digested, ligated, and transformed all of them BamHI parts into Righty cells. Jin and I also miniprepped the cultures that were grown up on Friday (including my ligase cultures, my BamHI cultures, and some cultures for Dirk and Bing). I also grew up colonies for Aron and Molly from their plates.

Today, I found out that 3 out of the five BamHI parts that I plated had no colonies. Jin thinks that the vector digest that I used was too dilute. I will redo the ligation and transformation steps for those parts tomorrow. I also got sequencing back from yesterday's samples. Ligase #5 is perfect! yay! So, I went in and set up PCRs for the rest of the ligase parts (the one that I have right now if {rbs.ligase!}). I set them up at 2K55 w/ & w/o DMSO and at 2K45 w/ & w/o DMSO. With the exception of {<r.BamHI>}, the other BamHi parts seem to be problematic (either mutations or bad reads again). So, I guess that I will follow through with the cloning from I716210 for the other BamHI parts and see how it goes. I will check the reverse sequences for the Cre parts tomorrow.

• Recent changes
• What links here
• Related changes
• Special pages
• My preferences

• Printable version
• Permanent link
• Privacy policy
• Disclaimers