"
Team:KULeuven/24 July 2008
From 2008.igem.org
(→Modeling) |
|||
| Line 71: | Line 71: | ||
|[[Image:Sim_pulse_generator_cI.jpg|450px]] | |[[Image:Sim_pulse_generator_cI.jpg|450px]] | ||
|} | |} | ||
| + | |||
| + | The lactonase amount does receed to 0 when the filter has 0 output, when the inverter gives high input, but this could cause delay to cell death, due to the slow degradation of lactonase. | ||
| + | |||
| + | [[Image:Sim_pulse_generator_pulses.jpg|500px|center]] | ||
Interesting link to a pulse generator system that seems to work: | Interesting link to a pulse generator system that seems to work: | ||
Revision as of 07:58, 25 July 2008
| << return to notebook | return to homepage >> | ||
| < previous friday | ← yesterday | tomorrow → | next monday > |
Contents |
Lab Work
Wet Lab
Stefanie and Hanne made a glycerolstock of all the parts we received from the iGEM headquarters. Everything is now stored in two -80°C freezers. You can find the cells with the parts in box S&PF7. You can look up in the cmpg database where you should search for a specific part. In the afternoon we started the protocol to make the right E.coli strain by transducing the EnvZ-mutation from V1012 to MC1061 cells. We made a liquid culture of the donor and acceptor cells. Phage P1 was incubated with the acceptor. Tomorrow we'll continue the proces and bring phage P1 and the acceptor cells (MC0106) together, this should result in the right cells.
Because the concentrations of the isolated plasmids were low yesterday, we did it all over again. However, this time we tried to obtain higher concentrations of plasmid DNA. Normally, this will improve the success rate of the digestion. We did this for the following BioBricks:
| BioBrick | Sample 1: Concentration | Sample 2: Concentration |
|---|---|---|
| B0032 | 114.8 ng/µl | / |
| B0034 | 73.8 ng/µl | 95.1 ng/µl |
| E0022 | 86.4 ng/µl | / |
| I714891 | 140.9 ng/µl | / |
| J23100 | 345.0 ng/µl | 176.1 ng/µl |
| M30109 | 54.3 ng/µl | / |
| R0084 | 66.9 ng/µl | 60.9 ng/µl |
| B0015 | 112.3 g/µl | 130.3 ng/µl |
| C0040 | 177.1 g/µl | 161.7 ng/µl |
Then the plasmids were digested with the appropriate restriction enzymes (EcoR1, Spe1, Xba1). In order to see whether the digestion worked, we put the samples on an agarose gel. The plasmids with BioBricks I714891 and B0015 were not cut properly by the enzymes. The other parts were cut out of the gel and are ready to be purified and ligated.
| BioBrick | Restriction enzymes | length desired fragment | success rate digestion |
|---|---|---|---|
| B0032 | EcoR I, Xba I | 2077 | probably |
| B0034 | EcoR I, Xba I | 2077 | probably |
| E0022 | EcoR I, Spe I | 783 | OK |
| I714891 | EcoR I, Spe I | 757 | failed |
| J23100 | EcoR I, Spe I | 51 | OK |
| R0084 | EcoR I, Spe I | 129 | OK |
| B0015 | EcoR I, Xba I | 2193 | failed |
| C0040 | EcoR I, Spe I | 681 | OK |
Dry Lab
Primers for the construction of T7 polymerase with UmuD tag were written out.
Modeling
Pulse generator has been reviewed, the parameters have been checked but there are issues... the pulse generator doesn't work (pure physically): when a step signal of T7 is applied cI is produced, which will then repress its transcription. Of course, this will develop to an steady state with a cI level equal to a non zero value.
A zero cI value would result in zero repression, thereby restarting the transcription of the cI gene and start producing cI again anyway.
Because the cI value remains non zero, so will the lactonase production, and so there will always be a constant amount of lactonase present. Question is how much this concentration will affect the system considering the case of no light present. No light present means HSL production which should bind to LuxR, but instead will react with lactonase to an hydroxy-acid. If the concentration of lactonase is considerable, and remains somewhat steady, cell death would never occur.
| 
|
The lactonase amount does receed to 0 when the filter has 0 output, when the inverter gives high input, but this could cause delay to cell death, due to the slow degradation of lactonase.
Interesting link to a pulse generator system that seems to work: Pulse Generator Keasling Lab
The memory system has been reviewed as well. The old system seemed unsuccesful, a new system has been found proven to work. There are however not enough repressors available to implement this system without having interference with other parts. ...
Wiki has been updated a bit more. SBMLSqueezer was used to produce pdf files with the celldesigner reactions, species and parameters. Biobricks pictures were added and some other stuff.
Remarks
iGEM gave us plasmids in cells. Which cells?
Quote of the day
GAS!
