Team:BCCS-Bristol/Modeling-BSim Parameter File

Contents 1 BSim Parameter File 1.1 How To Use The File 1.2 Option Definitions 1.2.1 General Simulation Options 1.2.2 Bacteria, Particle and Boundary Sets 1.2.3 Chemical Fields 1.2.4 Visual Aids 1.2.5 Simulation View 1.2.6 Batch Settings 1.2.7 Example parameter file

BSim Parameter File

How To Use The File

Paramter files are run as an argument to the BSimBatch program:

java bsim.BSimBatch ./Parameter_Files/BSimExp-Adhesion_3_Control.txt

Option Definitions

General Simulation Options

DT:	0.005

The time step (in seconds) used by the simulation. This should be small enough that you do not get objects moving through each other or that two objects get so close in a single time step that the reactive force pushes them too far apart.

VISCOSITY:	0.001 

The viscosity of the medium in Pa.s. This effects the speed of movement of the bacteria. The force of the bacteria should be selected based on this.

PHYSICS_WELL_WIDTH_BACT_BACT:	0.0
PHYSICS_WELL_DEPTH_BACT_BACT:	0.0
PHYSICS_WELL_WIDTH_BACT_PART:	0.0
PHYSICS_WELL_DEPTH_BACT_PART:	0.0
PHYSICS_WELL_WIDTH_PART_PART:	0.0
PHYSICS_WELL_DEPTH_PART_PART:	0.0
PHYSICS_WELL_WIDTH_PART_BDRY:	0.0
PHYSICS_WELL_DEPTH_PART_BDRY:	0.0
PHYSICS_WELL_WIDTH_BACT_BDRY:	0.0
PHYSICS_WELL_DEPTH_BACT_BDRY:	0.0
PHYSICS_REACT_FORCE:	15.0

All interactions between bacteria, particles and boundaries are handled by a potential function. Each of these options specifies the relevant options for the linear piece-wise function. The same reaction force (when objects overlap) is shared by all objects.

BACTERIA_RADIUS:	0.7

The default radius of a bacterium in microns.

BACTERIA_FORCE_DOWN:	0.41
BACTERIA_FORCE_UP:	0.4387

The force (in pN) that a bacterium exerts when moving up and down an Aspartate chemotactic gradient.

UP_RUN_LENGTH:	1.6
DOWN_RUN_LENGTH:	0.7
ISO_RUN_LENGTH:	0.86

The mean run length up and down an Aspartate chemotatic gradient (in seconds). Also the run length when in an isotropic region is given. This mean is for the exponential distribution used to model the run length distribution.

PARTICLE_RADIUS:	10.0

The default radius of a particle in microns.

Bacteria, Particle and Boundary Sets

CREATE_BACTERIUM_SINGLE:	x	y	diameter(0=default)

CREATE_PARTICLE_SINGLE:	x	y	diameter(0=default)

CREATE_BACTERIA_SET: p1x	p1y	width	height	number	type	diameter(0=default)

Creates a set of uniformly random distributed bacteria within a rectangular region defined by an upper left point, p1, and a width and height. If you wish the bacteria to be the default size then the diameter value should be 0, otherwise enter the size in microns. There are 5 types of bacteria:

1. Basic -
2. Sensing -
3. Co-ordinated -
4. Recruit -
5. Dead -

CREATE_PARTICLE_SET: p1x	p1y	width	height	number	type	diameter(0=default)

Creates a set of uniformly random distributed particles within a rectangular region defined by an upper left point, p1, and a width and height. At present there is only one type of particle and so this should be left as 0. If you wish the particle to be the default size then the diameter value should be 0, otherwise enter the size in microns.

CREATE_BOUNDARY_SOLID:	p1x	p1y	p2x	p2y

Creates a straight solid boundary between two points.

CREATE_BOUNDARY_WRAP:	p1x	p1y	p2x	p2y	pOffsetX	pOffsetY

Creates a straight wrapping boundary between two points (p1, p2) with an offset vector that is used to place objects that cross the boundary.

Chemical Fields

FIELD_GOAL_DEFINE:	p1x	p1y	width	height	xboxes	yboxes	threshold	type	boundary	rate
FIELD_GOAL_SETUP:	visible	type(1=LINEAR_X,2=LINEAR_Y)	startCon	endCon	unUsed(setToZero)	unUsed(setToZero)
FIELD_COORD_DEFINE:	p1x	p1y	width	height	xboxes	yboxes	threshold	type	boundary	rate
FIELD_COORD_SETUP:	visible	type(1=LINEAR_X,2=LINEAR_Y)	startCon	endCon	unUsed(setToZero)	unUsed(setToZero)
FIELD_RECRUIT_DEFINE:	p1x	p1y	width	height	xboxes	yboxes	threshold	type	boundary	rate
FIELD_GOAL_SETUP:	visible	type(1=LINEAR_X,2=LINEAR_Y)	startCon	endCon	unUsed(setToZero)	unUsed(setToZero)

The chemical field is defined by an upper left point p1 with width and height. Boxes define the resolution of the gradient. The threshold is the smallest difference in the chemotactic gradient that a bacteria can sense. The Type of field can either be fixed or diffuse being 1 and 2 respectively. The boundary defines whether the chemical signal can diffuse out of the boundary or whether the chemicals are retained within, 1 is a fixed boundary whereas 2 is a leaky boundary. The rate sets how quickly the chemcial can diffuse.

Visual Aids

VISUAL_AID_BACTERIA_TRACE:	StepsSkipped 
VISUAL_AID_AVG_BACTERIA_TRACE:	StepsSkipped
VISUAL_AID_PARTICLE_TRACE:	StepsSkipped
VISUAL_AID_CLOCK:	AlwaysLeaveAs1

Simulation View

SCREEN_HEIGHT:	pixels
SCREEN_WIDTH:	pixels
SCREEN_ZOOM:	xZoom(1Pixel=1Micron)1
SCREEN_MOVE:	xTrans	yTrans

Batch Settings

VIDEO_FRAMES_SKIP:	FramesToSkipInVideo(OnlyUsedWhenRunByBSimBatch)
RECORD_VIDEO:	FlagToRecordVideo(1=true)(OnlyUsedWhenRunByBSimBatch)
DATA_FRAMES_SKIP:	FramesToSkipInTextOutput(OnlyUsedWhenRunByBSimBatch)
SIMULATION_LENGTH:	NumberOfTimeSteps(OnlyUsedWhenRunByBSimBatch)
SIMULATION_RUNS:	NumberOfRuns(OnlyUsedWhenRunByBSimBatch)
EXPORT_DIR:	DirectoryPath(MustExist)(OnlyUsedWhenRunByBSimBatch)

Example parameter file

File:BSimExp-Density 1600.txt This file defines the simulation of 1600 bacteria following the chemotatic gradient. Within the simulation there is one particle.