"
Team:BCCS-Bristol/Modeling-BSim Parameter File
From 2008.igem.org
Revision as of 13:52, 5 September 2008 by Tgorochowski (Talk | contribs)
BSim Parameter File
How To Use The File
Definition
DT: 0.005
The time step (in seconds) used by the simulation. This should be small enough that you do not get objects moving through each other or that two objects get so close in a single time step that the reactive force pushes them too far apart.
VISCOSITY: 0.001
The viscosity of the medium. This effects the speed of movement of the bacteria. The force of the bacteria should be selected based on this.
PHYSICS_WELL_WIDTH_BACT_BACT: 0.0 PHYSICS_WELL_DEPTH_BACT_BACT: 0.0 PHYSICS_WELL_WIDTH_BACT_PART: 0.0 PHYSICS_WELL_DEPTH_BACT_PART: 0.0 PHYSICS_WELL_WIDTH_PART_PART: 0.0 PHYSICS_WELL_DEPTH_PART_PART: 0.0 PHYSICS_WELL_WIDTH_PART_BDRY: 0.0 PHYSICS_WELL_DEPTH_PART_BDRY: 0.0 PHYSICS_WELL_WIDTH_BACT_BDRY: 0.0 PHYSICS_WELL_DEPTH_BACT_BDRY: 0.0 BACTERIA_RADIUS: 0.7 BACTERIA_FORCE: 0.4 BACTERIA_SPEED: 50.0 UP_RUN_LENGTH: 1.6 DOWN_RUN_LENGTH: 0.7 ISO_RUN_LENGTH: 0.86 PARTICLE_RADIUS: 10.0 *** ************************************** *** Bacteria/Particle/Boundary Sets *** ************************************** CREATE_BACTERIUM_SINGLE: x y diameter(0=default) CREATE_PARTICLE_SINGLE: x y diameter(0=default) CREATE_BACTERIA_SET: p1x p1y width height number type diameter(0=default) CREATE_PARTICLE_SET: p1x p1y width height number type diameter(0=default) CREATE_BOUNDARY_SOLID: p1x p1y p2x p2y CREATE_BOUNDARY_WRAP: p1x p1y p2x p2y pOffsetX pOffsetY *** ************************************** *** Chemical Field Settings (These should be defined for every simulation) *** ************************************** FIELD_GOAL_DEFINE: p1x p1y width height xboxes yboxes threshold type boundary rate FIELD_GOAL_SETUP: visible type(1=LINEAR_X,2=LINEAR_Y) startCon endCon unUsed(setToZero) unUsed(setToZero) FIELD_COORD_DEFINE: p1x p1y width height xboxes yboxes threshold type boundary rate FIELD_COORD_SETUP: visible type(1=LINEAR_X,2=LINEAR_Y) startCon endCon unUsed(setToZero) unUsed(setToZero) FIELD_RECRUIT_DEFINE: p1x p1y width height xboxes yboxes threshold type boundary rate FIELD_GOAL_SETUP: visible type(1=LINEAR_X,2=LINEAR_Y) startCon endCon unUsed(setToZero) unUsed(setToZero) *** ************************************** *** Visual Aids *** ************************************** VISUAL_AID_BACTERIA_TRACE: StepsSkipped VISUAL_AID_AVG_BACTERIA_TRACE: StepsSkipped VISUAL_AID_PARTICLE_TRACE: StepsSkipped VISUAL_AID_CLOCK: AlwaysLeaveAs1 *** ************************************** *** View *** ************************************** SCREEN_HEIGHT: pixels SCREEN_WIDTH: pixels SCREEN_ZOOM: xZoom(1Pixel=1Micron)1 SCREEN_MOVE: xTrans yTrans *** ************************************** *** Batch Settings *** ************************************** VIDEO_FRAMES_SKIP: FramesToSkipInVideo(OnlyUsedWhenRunByBSimBatch) RECORD_VIDEO: FlagToRecordVideo(1=true)(OnlyUsedWhenRunByBSimBatch) DATA_FRAMES_SKIP: FramesToSkipInTextOutput(OnlyUsedWhenRunByBSimBatch) SIMULATION_LENGTH: NumberOfTimeSteps(OnlyUsedWhenRunByBSimBatch) SIMULATION_RUNS: NumberOfRuns(OnlyUsedWhenRunByBSimBatch) EXPORT_DIR: DirectoryPath(MustExist)(OnlyUsedWhenRunByBSimBatch)
