Team:Illinois/Bimolecular Fluorescence Biosensor Notebook

From 2008.igem.org

Revision as of 16:24, 29 October 2008 by Lbedelman (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

1st July

TE Buffer Recipe
- Uses
  - TE used to bring up oligos into solution

- People who know how to do this
  - Joleen, Luke

- Concentration
  - 10mM Tris
  - 1mM EDTA
  - pH 8.0

- Method
  - For 500mL volume
    - Add: 0.1861g EDTA; 0.6057g Tris to 1 liter flask
    - Bring it up to 500mL with Deionized water (filtered in ---? container)
    - Put on "corning" mixer; get a larger stir bar from drawer and put on slow ~20 RPM rotation; no heat for 2-3 minutes until fully dissolved.
    - Standardize the pH meter (instructions on sign at prep bench)
    - Put gloves on; put pH electrode in flask but first add stir bar and put on low speed mixing
    - Bring pH to 8.0 (i.e. 8.00 +/- 0.05) by adding base (NaOH) or acid (HCl) in very small drops using a plastic pipette. (Wait for pH meter to eqiullibrate after each drop)

IMP: Put cap back on bottom of pH probe

- - - Put coloured tape along side of flask and label with pH, name and iGEM
    - Cover it with heavy duty aluminium foil (just like a square inch to cover the top) and put a strip of autoclave tape along top of foil
    - Optional: out in big plastic autoclave bin
    - Bring to autoclave room; do not use the big "Beta Star"

    Set on: 15 minutes; ~250 degrees Farenheit = ~121 degree Celcius; "liquid" run; for "operator #" just press enter; then "Run"; tubes = ~ 45 minutes; total to run since it must cool down and decompress

- - - (Some extra side notes still to add)

TAE Buffer Recipe

TBE Buffer Recipe
- - 1 liter of 5x TBE Running Buffer, pH 8.13-8.23

- Materials
  - Tris-base - 54.0g
  - Boric Acid - 27.5g
  - EDTA - 2.92g
  - DI Water - 1.0L

- Method
  - Stirred with stirring rod for 3-5 minutes

Agarose Gel

2nd July

DNA Sequencing - "Core Sequencing " --?
- (https://unicorm.biotec.uiuc.edu) -> "create login account" -> go to "payment manager"
- Primer: One end primer, included in per tube, 10uM concentration of primer
- 30-40 ng/uL? sample concentration
- Protocols/prep online
- ---? to view chromatograms on site
- $5 for sequencing; $2.50 for "--? to load"
- Purify with PAGE before bringing in

1st July

PCR Synthesis of BiFC Genes
- from "PCR-based Synthesis of Long DNA Sequences" 2006 Nature Protocols
- Attempted synthesis of Venus Fluorescent Protein halves (N and C term) fused to HIV gp41 epitope
- Formed gene from ~50nt segment oligos at 30uM
- PCR reactions as described in paper; 50uL reaction volume
- 'FivePrime MasterMix' PCR mix
- PCR protocol as in paper for both N terminal

2nd July

Gel #1: Results from July 1 PCR
- Each lane has 2uL orange/blue loading dye; 1% agarose gel
- Lane 1: Hyperladder II; 2: 8uL C term whole rxn; 3: Cterm w/o leftmost oligo; 4: C w/o rightmost; 5: Just outer oligos 6-9: Same except N terminal fragments
- 60 minutes at 140 V then 10 min in EtBr dye
- No great product

3rd July

Gel #2: again of July 1 PCR
- all lanes have 2uL Loading dye; 1% agarose gel
- Lanes 1+10=ladder; 2+4=8uL whole N term gene; 6+8=8uL C term gene
- again, very fuzzy, impure product

8th July

Agarose Gel Purification of Oligos
- Made 4% Agarose gel with 8g Agarose, 40mL TBE, 160mL H2O
- Made 2% with 4g Agarose
- Microwave for 1:35 for optional warming
- Ran total of 2 hours on 80 Volts -> --? (decent?)

TAZ side project
- Adam Z streaked 4 plates with High Elu, Amp m100, Taz Ecoli
- Check for growth tomorrow

Gel Extraction Protocol
- Use microscope slide to cut gel out
- Visualize on Bio unit with plastic shield from drawer below unit attached to slide out unit
- Amount of gel collected(into 1.5mL tubes)
- Oligo #2: 0.0671g -> 402.6g

  Oligo #3: 0.062g -> 362.0g
  Oligo #4: 0.1062g -> 637.2g
  Oligo #5: 0.0747g -> 448.2g
  Oligo #6: 0.0585g -> 351.0g
  Oligo #7: 0.0601g -> 360.6g
  Oligo #8: 0.0440g -> 264.0g
  Oligo #9: 0.0482g -> 289.2g

9th July

- Cells were found in small colonies -> decided to let them grow for 24 more hours
- Plated 4 more E.coli strains with Xgel (spread)
- Cultured 4 vials of E.coli with X gel
- Check back in 36 hours

9th July

PCR amplification of July 1 PCR
- Hope to get more product, specifically C terminal half
- half of 50uL of pcr reaction volume obtained as 'oligo mix'
- Tube 1: 25 uL oligo mix +1uL of each outer oligo + 20uL Mango MasterMix
- Tube 2: 3uL of oligos 1-5, plus 20uL MasterMix; 50uL total volume with added water
- Tube 3: 3uL oligos 6-10 plus 20uL MasterMix

9th July

Gel #4: Analysis of July 9 PCR
- 1% Agarose gel
- Lane 1: Hyperladder II; 3: 8uL C-term protein (tube1); 5: 8uL tube2; 7: 8uL tube3
- Run 50 minutes at 140 Volts
- Again, lackluster: huge streak seen above and below where we expected product
- Try Again

11th July

Temperature-gradient PCR of Unpurified Oligos
Below is the gel of this reaction at different annealing temps
- 1% agarose gel, run for 50 mins at 140V
- Lane 1: Hyperladder II; 2: 10uL from rxn with 50° annealing temp; 3: 50.9°; 4: 52.8°; 5: 56°; 6L 58.8°; 7: 59.8; Lane 8: 0.6uL 100bp ladder
- Some improved results in mid-range of annealing temp, but clearly have grossly impure product and need to regroup
- Try purifying the 50nt oligos we ordered: likely only ~50% pure from factory

14th July

PAGE Purification of Oligos
- 10% premade PAGE gel w/ 10 50uL wells
- added 40uL of each oligo to well and 8uL loading dye
- Just did this for C terminal protein; also only the inner oligos since the outer are smaller and probably already pure
- Lane 1 and 10 ladder; lanes 2-9 correspond to oligos 2-9 respectively for the C term protein synthesis
- Loaded into PAGE chamber
- Ran for 70 mins at 140V
- Very smeared results-> used too much volume in each well

15th July

Redo of PAGE Purification of Oligos
- Same as July 14th protocol except used 20uL of each oligo instead of 40uL to prevent overflowing
- Also used 10uL and not 8uL loading dye
- Ran for 30 minutes at 200 Volts
- Put in EtBr dye for 15 mins and imaged
- HUGE streaks for each of our products; either gel was run poorly or we have like 10% purity of oligos
- Conclusion: this PCR gene synthesis method will not work
- Review literature for other approaches

20th July

Obtained a Citrine Fluorescent protein from UIUC Rao lab
- On bacterial plasmid
- Will use instead of synthesizing whole gene de novo
- Sequence known so can design overlapping primers from our 'novel' part of the gene
- Instead of fusing HIV gp41 fragment to each FP half, will fuse a poly (6X) His tag
- Model system to evaluate BiFC assay: His-tag fused to each FP half
- Bound by mAb against PolyHist -> complementation (hopefully)

30th July

NEW Gene Synthesis Protocol
- From 'Gene2Oligo' tool available online
- Breaks gene up into ~40nt chunks but OVERLAP FULLY so that even impure oligos can create pure product
- AminoAcid Sequence: overlap CFP from Rao lab-> 20AA flexible peptide linker-> PolyHis Tag-> stop
- This ~100 nt sequence will be synthesized de novo w/ Gene2Oligo Method
- Ordered 6 oligos of ~40nt, brought to 20uM
- PCR as described by Gene2Oligo paper:
- 0.1uM final oligo concentration, plus FivePrime MasterMix, plus 25mM MgCl2, plus water to 50uL
- First performed the Gene2Oligo 'synthesis' step of the protocol

31 July

Gene2Oligo 'Amplification' Step
- As described in paper: 50 uL pcr tube; 20uL MasterMix, 1.5 uL of each 30uM outer primer, 3uL of rxn from July30, plus MgCl2
- Ran w/ PCR reaction from paper
- Product added to gel from other IGEM expt: AWESOME, dark, perfect band right where we expect it
- This method works to synthesize at least smaller (~100nt) segments
- Also, we have a functional collection of the His-Tag, linker, overlap gene
- Next step: amplify out the CFP from the plasmid to fuse to this

5th August

PCR Amplification of Citrine Fluorescent Protein
- Ordered primers brought up w/ water to 300uM
- In each PCR tube: 30uM final concentration of each (forward and reverse) primer, 20uL MasterMix, 1uL out of 50uL plasmid, brought up to 50uL total volume
- PCR protocol: 90° for 50 sec; 50° for 50 sec; 72° for 1:45; repeat this for 30 cycles, then 72° for 5:00, then hold at 4° for ever