← Yesterday ↓ Calendar ↑Tomorrow →
Cloning of flagella gene promotors into J61002 plasmid
We have to digest (by EcoRI and SpeI) the PCR products of yesterday (amplification of pFlgA (MP124), pFlgB (MP125), pFlhB (MP126) and pFlhDC (MP127) in order to clone them into the J61002 plasmid (that we must extract and then digest by EcoRI and SpeI).
The J61002 plasmid was extracted from overnight bacteria culture using the QIAspin Miniprep Kit (QIAGEN) by QIACube.
- Number of this plasmid extraction : MP123
- Carried out 3 times (3 tubes)
Quantification of DNA
In order to quantify the DNA contained either in the Miniprep product of MP123 or in the PCR products of MP124, MP125, MP126 and MP127 previously purifed yesterday by the QIAquick Gel Extraction Kit, we carried out :
By electrophoresis
- 10µl of 100pb DNA ladder
- 5 µL of the sample + 1 µL of 6X blue loading dye
- Migration in a 1,5% agarose gel; ~30' at 100W.
Band
| 2
| 3
| 4
| 5
| 6
|
Name
| MP123
| MP124 PCR product
| MP125 PCR product
| MP126 PCR product
| MP127 PCR product
|
Promotor
| J61002
| pFlgA
| pFlgB
| pFlhB
| pFlhDC
|
==>Results : The MP123 plasmid is clearly visible but the PCR products (purified by QIAquick Gel Extraction) aren't. There might be a problem during the purification step using the QIAquick Gel Extraction. Whatever, we still go on with the digestion.
By Spectrophotometer
Besides the MP123 sample (J61002 plasmid) was quantified using a Bio Photometer (Eppendorf).
Name
| concentration
| A280/A260
|
MP123 n°1 (J61002)
| 102 µg/mL
| 1,77
|
MP123 n°2 (J61002)
| 120 µg/mL
| 1,69
|
MP123 n°3 (J61002)
| 130 µg/mL
| 1,73
|
==> Conclusion :we took the MP123 n°2 to do digestions
Digestion
Name
| DNA to digest
| Enzyme 1
| Enzyme 2
|
D132
| pFlgA
| EcoRI
| SpeI
|
D133
| pFlgB
| EcoRI
| SpeI
|
D134
| pFlhB
| EcoRI
| SpeI
|
D135
| pFlhDC
| EcoRI
| SpeI
|
D136
| J61002
| EcoRI
| SpeI
|
For each sample (MP123 and PCR products of MP124, MP125, MP126 and MP127):
- 10 µL of DNA (Miniprep eluate or PCR products)
- 12,5 µL water
- 2,5 µL buffer 2
- 0,25 µL BSA
- 1 µL EcoRI
Incubation 1h30 at 37°C
Incubation 1h30 more after adding 1 µL of SpeI
Electrophoresis of the digested J61002 plasmid
- 10µl of 1 kb DNA ladder
- 30µL of the digestion + 5 µL of 6X blue loading dye
- 3µl of not digested plasmid + 1µl of 6X blue loading dye
- Migration in a 0,5% agarose gel; ~30' at 100W.
Electrophoresis of digested J61002 (D136)
Band
| 2
| 3
| 4
| 5
| 6
|
Name
| D136
| D136
| -
| MP123
|
Description
| digested J61002
| digested J61002
| -
| control with undigested J61002
|
==>Conclusion :' we observe a band near 3000 pb, and we excpeted a size of 3002 pb. So we observe the linearise plamsid (only one band at the good size).
Purification of the Digested DNA
Excision, dissolution and purification of the band of interest using the Wizard SV Gel and PCR Clean-Up System (Promega).
Purification of the digested PCR products using the same kit.
Analysis of the purified digested DNA:
- band 1 : ladder 1kb 10µL
- band 2 : D136 4µL + 1µL Loading dye
=> Concentration : +/- 12ng/4µL -> 3ng/µL
Ligation
Protocol
For each sample,
- 1 µl Ligase
- X µl Vector
- Y µl Insert (3x more than vector)
- 2 µl Ligase Buffer 10x
- 20 µl qsp H2O
- Incubated O/N at 4°C (in the fridge)
List of ligations
Name
| Vector
| Insert
| Antibio
| Vol. vector (µl)
| Vol. insert (µl)
| Vol. H20 (µl)
|
L128
| D136
| D132
| A
| 5
| 5
| 7
|
L129
| D136
| D133
| A
| 5
| 5
| 7
|
L130
| D136
| D134
| A
| 5
| 5
| 7
|
L131
| D136
| D135
| A
| 5
| 5
| 7
|
Control
| D136
| -
| A
| 5
| -
| 6
|
Cloning of pflhDC
Yesterday the isolation of pflhDC did not work : the PCR product measured more than 1.5 kb. We checked the primers, they are well designed but they contain a sequence similarity with other sequences in E.coli K12.
To amplify more precisely the promoter, we decided to do a PCR with gradient.
Protocol
- 10µL Phusion buffer 5X
- 1µL dNTP
- 2.5 µL Oligo F (O111) 10mM
- 2.5 µL Oligo R (O113) 10mM
- 1µL template DNA
- 0.5µL Phusion polymerase
PCR Program
PROMOTE2
* LID : 105 °C
*1. T: 95°C 5min
*2. T: 95°C 5min
*3. T: 55°C 30s ~>G: 5°C
*4. T: 72°C 1min30
*6. GO TO: 2 REP: 29
*7. HOLD: 10°C
Results
PCR with gradient : amplification of pflhDC
On the left side, the temperature was 50°C, in the center 55°C and on the right 60°C.
We can't see anything on this electrophoresis (except the ladder) !
Remarks :
- We forgot the negative control
- The temperature should be 60°C +- 5°C
- For a promoter, 45s of elongation is enough (~1min per kb)
- We could have used a taq polymerase instead of the phusion one
- We will do it again
The return of PCRs for amplification of promoters
As our results were not very encouraging, we started again a PCR to amplify:
- pflhDC ( 12 times with 12 different temperatures between 55°C and 65°C)
- pflgA (60°C)
- pflgB (60°C)
- pflhB (60°C)
- Negative control
Protocol
We used the taq polymerase, following a typical protocol.
Program
The PCR Program was a new version of PROMOTE2 :
PROMOTE2
* LID : 105 °C
*1. T: 95°C 5min
*2. T: 95°C 5min
*3. T: 60°C 30s ~>G: 5°C
*4. T: 72°C 45 sec
*6. GO TO: 2 REP: 29
*7. HOLD: 10°C
Results
We will have the results tomorrow
Culture for glycerol stocks and MiniPreps
- E.coli K12 strain MG1655, to create a glycerol stock of this wonderful bacteria
- [http://partsregistry.org/Part:BBa_J61002 pJ61002]
Protocol :
- 5 mL LB with the appropriate antibiotic (here 5µL Amp 1000X)
- With a toothpick, we select a single colony
- 37°C 225 rpm, overnight
Isolation of colonies
We isolated colonies of several strains on a petri dish (streaked):
- S119
- S120
- [http://partsregistry.org/Part:BBa_E0240 E0240]
- [http://partsregistry.org/Part:pSB3K3 pSB3K3]
Culture : 37°C overnight
|