Team:EPF-Lausanne/Modeling

From 2008.igem.org

Revision as of 20:54, 29 October 2008 by Ndenerva (Talk | contribs)

Contents

The Challenge...

First of all, as described in the Project description, we choose some rules which give a nice pattern:


Transferfunction.jpg Arrow.jpg Triangles.jpg

How can we design a genetic network corresponding to these rules?

The main challenge is to take into account that the cells sense their own AHL signaling molecules. As a consequence it is quite difficult to design a bistable network.

One solution is to co-express some of the proteins present in the rest of the network, under the same promoter as the enzymes of the AHL signaling molecules (LuxI and RhlI).

Furthermore it should be possible to pass from one steady state to the other, by applying AHL concentration gradients to the cells. This is required in order to allow cells to change the state of their neighbors.

The Plan

In order to solve these problems we will proceed in 3 steps:

-Find the network exhibiting a transfer function corresponding to the rules displayed above without including the auto-sensing.

-Find the out which species have to be co-expressed with the enzymes of the AHL signaling molecules in order to keep the same transfer function when the auto-sensing is included

-Vary the model parameters in order to find a parameter set for which the switching between the two steady states can be achieved by giving perturbations only in the form of RHL signaling molecule gradients.

Double input model: auto-sensing is ignored

Here we describe a semi-quantitative model of the Lux band-pass detector and the Rhl high-pass detector. The model describes each proteins and sending molecules involved in the system. The feedback of the production of AHL signaling molecules inside the cell is ignored. At this stage, we test the ability of the system to process a constant input of green or red (ALux or ARhl) and choose an output state, either red or green.

Finnewscheme.png

States

Processor states.jpg

ODEs

Processor model.jpg

Parameters

Processor param.jpg

Simulation

The model nicely shows that for a certain range of AHL concentrations, the system can turn into either green or red. the following figure shows that we can achieve the band-pass filter on the red input and a high pass on the green input. Therefore, we can generate the choosen rule set where only medium level of red (AHL Lux) and low to medium level of green (AHL Rhl) can turn the system into the green state. Processor sim.jpg

Bistable switch model

In this more complex model, we implemented the making of LuxI and RhlI in the cell, resulting in the self-production of AHL. We added two negative feedback loops (M and cI, blue arrows) that must help the system to lock itself into the green state. The red state is more stable than the green state and did not need any feedback to lock itself.


ClXfin2.png

States

Bistable states.jpg

ODEs

Bistable model.jpg

Parameters

Bistabl param.jpg

Simulation

GFP (left) and RFP (middle) expression for concentration of AHL (Lux or Rhl) pulses. On the right, figure shows the ratio of GFP/RFP. This results shows that a given range of AHL can produce the green state. This is in good agreement with the rule set that we propose, where only medium level of red input (AHL Lux) and low to medium level of green input (AHL Rhl) can generate green.

Bistabl sim.jpg

The following figures show the dynamics of the different states involved in the system for different AHL pulses. On the left, the system is locked into the green state after a pulse of 1.6 uM of Lux AHL and 3 uM of Rhl AHL. On the right, the system is locked into the red state after a pulse of 4 uM of Lux AHL and 4 uM of Rhl AHL. The model nicely shows the dominance of either TetR (purple line) or LacI (light blue line) for the green, respectively red state. It also shows the importance of the twos negative feedback made by the M represssor (dashed line) and cI (black line) to maintain the system in the green state.


Green state 1-6 3.jpg Red state 4 4.jpg

Perturbation

One problem now, is that if we start from the green steady state it is not possible to perturb the system with only AHL pulses to pass to the red steady state, while the inverse is possible. Instead with perturbations on TetR and cI it is possible to make a red to green transition. But in our system a cell cannot perturb its neighbors in this way.

If it is possible to force all the cells to be in the green state at the beginning of the experiment it should still be possible to have the generation of a pattern since the green to red transition is possible with an AHL pulse.

Still it would be much more interesting to have the other transition also possible.

Is it possible to find other parameter sets where the green to red and red to green transitions can be achieved with AHL pulses?