Team:Chiba/Project/Experiments:Sender Crosstalk

From 2008.igem.org

(Difference between revisions)
(Future plans)
 
(53 intermediate revisions not shown)
Line 11: Line 11:
|}
|}
__NOTOC__
__NOTOC__
-
 
==Sender Crosstalk==
==Sender Crosstalk==
=== Design===
=== Design===
-
[[Image:Sender switch Chiba.jpg|left|frame|'''Fig.1''' Sender switch]]
+
[[Image:Sender switch Chiba.jpg|left|frame|'''Fig. 1 Sender switch''']]
-
[[Image:AHL variety chiba.gif|frame|left|'''Fig.2''' AHL varieties]]
+
[[Image:AHL variety chiba.gif|frame|left|'''Fig. 2 AHL varieties''']]
-
Each species has their own LuxI-type proteins,which synthesize their specific autoinducers,AHLs.AHLs produced by different LuxI-type proteins differ only in the length of the acyl-chain moiety and substitution at position C-3.LuxR,which is original for Vibrio fischeri,is activated by its cognate autoinducer,3OC6HSL.However,LuxR is also activated by non-endogenous molecules,C4HSL,C6HSL,and 3OC12HSL.Activation by non-endogenous molecules requires a higher signal concentration(2).This results in slower activation of receivers,when AHL concentration is increasing.
+
Each species has their own LuxI-type proteins,which synthesize their specific autoinducers, AHLs. AHLs produced by different LuxI-type proteins differ only in the length of the acyl-chain moiety and substitution at position C-3[[Team:Chiba/Project/Experiments:Sender Crosstalk#references|<sup>(4)</sup>]].LuxR,which is original for Vibrio fischeri, is activated by its cognate autoinducer, 3OC6HSL. However, LuxR is also activated by non-endogenous molecules, C4HSL, C6HSL, and 3OC12HSL. Activation by non-endogenous molecules requires a higher signal concentration [[Team:Chiba/Project/Experiments:Sender Crosstalk#references|<sup>(1),(2)</sup>]]. This results in slower activation of receivers, when AHL concentration is increasing.
Line 57: Line 56:
To characterize quorum sensing crosstalk, constitutive AHL senders were mixed with constitutive receivers and measure fluorescence intensity.
To characterize quorum sensing crosstalk, constitutive AHL senders were mixed with constitutive receivers and measure fluorescence intensity.
   
   
-
#Transformed Senders into E.coli strains(XL10Gold) and Receiver into E.coli strain(JW1908).
+
#Transformed Senders into ''E. coli'' strains (XL10Gold or JW1908) and Receiver into ''E. coli'' strain (JW1908).
-
#Inoculated them independently in liquid media. Incubated at 37°C for 12hours.
+
#Inoculated them independently in liquid media. Incubated at 37&deg;C for 12hours.
#Mixed them.
#Mixed them.
-
#Incubated at 30&deg;C.
+
#Incubated at 37&deg;C or 30&deg;C.
-
#Measured intensity of green fluorescence(485 nm(excitation) and 527 nm(emission)) at regular time intervals.
+
#Measured intensity of green fluorescence (485 nm (excitation) and 527 nm (emission)) at regular time intervals.
[[Team:Chiba/protocol/phenotype/timedelay|more details...]]
[[Team:Chiba/protocol/phenotype/timedelay|more details...]]
Line 67: Line 66:
===Results & Discussion===
===Results & Discussion===
[[image:senders_crosstalk_chiba_01.gif|frame|
[[image:senders_crosstalk_chiba_01.gif|frame|
-
'''Fig.3''' senders crosstalk test.senders strain XL10Gold,Receiver strain JW1908.Reaction temparature was 30°C.All measurements are averages from three replicate cultures with error bars representing standard deviations.Labeling:LuxI,RhlI,LasI means fluorescence induced by AHLs synthesized by LuxI,RhlI,LasI respectively.]]
+
'''Fig. 3 senders crosstalk test.'''senders strain XL10Gold,Receiver strain JW1908.Reaction temparature was 30&deg;C.All measurements are averages from three replicate cultures with error bars representing standard deviations.Labeling:LuxI, RhlI, and LasI means fluorescence induced by AHLs synthesized by [http://partsregistry.org/Part:BBa_K084012 BBa_K084012], [http://partsregistry.org/Part:BBa_K084008 BBa_K084008], and [http://partsregistry.org/Part:BBa_K084007 BBa_K084007] respectively.]]
-
====[[Team:Chiba/Sender experiments/Senders(XL10Gold) T9002(JW1908)#Reaction temparature:30°C|Senders(XL10Gold), T9002(JW1908)@30&deg;C, Sender(&mu;L):Receiver(&mu;L)=500:500, 100:1000, 10:1000]]====
+
====[[Team:Chiba/Sender experiments/Senders(XL10Gold) T9002(JW1908)#Reaction temparature:30&deg;C|Senders(XL10Gold), T9002(JW1908)@30&deg;C, Sender(&mu;L):Receiver(&mu;L)=500:500, 100:1000, 10:1000]]====
-
*37°Cで行った実験と比べ、LasIが活性。(8h後の蛍光強度、37&deg;C:30&deg;C=163:245)
+
When incubated at 30&deg;C,E.coli strain(XL10Gold) transformed with the LasI genes produced more AHL than at 37&deg;C.
-
*LasとLux(Plac)1:1で蛍光強度200に達するまでの時間に2.5時間の時差がみられた。
+
-
*Rhlのタグなしとタグ付きの差は、8h後の最終強度にしか現れなかった。
+
-
:また、差が一番でたのが30°Cで行ったこの実験で、タグなし:タグつき=507:456。
+
-
3OC6HSL,3OC12HSLに対する、LuxRの応答時間に、二時間の差ができた(3OC12HSLの場合、3OC6HSLに比べて二時間遅れて応答する)。
+
-
(そのときの条件は、培養温度30°C、genelatorの株はXL10Gold,Receiverの株はJW1908のとき、であった。) <??
+
-
When we used the cross-talk strategy using 3OC12HSL instead of 3OC6HSL, the delayed switch worked 2 hours after the original switch worked. Futher variation of delayed switches will be realized:
+
(Green fluorescence intensity after incubating for 8 hours was:
 +
::163 at 37&deg;C.
 +
::245 at 30&deg;C.
 +
3OC12HSL produced by LasI protein(expressed by[http://partsregistry.org/Part:BBa_K084007 BBa_K084007] and 3OC6HSL produced by LuxI protein(expressed by[http://partsregistry.org/Part:BBa_K084012 BBa_K0840012]) both activated LuxR protein and cousese gfp expression.The increase of green fluorescence intensity caused by 3OC12HSL was more gradualy than that caused by 3OC6HSL,time before fluorescence intensity reached at 200 was 2.5 hours longer than that of the 3OC6HSL.
===Future plans===
===Future plans===
Line 84: Line 81:
*To make the slope of transfer curve of our device to be steep:
*To make the slope of transfer curve of our device to be steep:
-
#Introduce Positive Feedback Loop into our gene circuit.
+
#Introduce Positive Feedback Loop into our genetic circuit.
===Other Experiments===
===Other Experiments===
====Visual Judgement====
====Visual Judgement====
-
*Fluorescence intensity was from 150 to 200 when the 2 mL of reaction culture in a test tube.
 
-
====[[Team:Chiba/Sender experiments/Senders(JW1908) T9002(JW1908)#Reaction temparature:37°C|Senders(JW1908), T9002(JW1908)@37°C, Sender(&mu;L):Receiver(&mu;L)=500:500, 100:1000, 10:1000]]====
 
-
*Among RhlI, LasI, and CinI+LVA, RhlI+LVA is the easist to cross-talk with LuxR
 
-
*Delay time by cross-talk among senders are generated only a range of one hour to amount
 
-
to 200 of fluorescence intensity.
 
-
====[[Team:Chiba/Sender experiments/Senders(JW1908) T9002(JW1908)#Reaction temparature:30°C|Senders(JW1908),T9002(JW1908)@30°C,Sender(&mu;L):Receiver(&mu;L)=500:500,100:1000,10:1000]]====
+
fluorescence intensity was from 150 to 200 when the 2 mL of reaction culture in a test tube.
-
====[[Team:Chiba/Sender experiments/Senders(XL10Gold) T9002(JW1908)#Reaction temparature:37°C|Senders(XL10Gold),T9002(JW1908)@37°C, Sender(&mu;L):Receiver(&mu;L)=500:500,100:1000,10:1000]]====
+
====[[Team:Chiba/Sender experiments/Senders(JW1908) T9002(JW1908)#Reaction temparature:37&deg;C|Senders(JW1908), T9002(JW1908)@37&deg;C, Sender(&mu;L):Receiver(&mu;L)=500:500, 100:1000, 10:1000]]====
-
====[[Team:Chiba/Sender experiments/Senders(XL10Gold) T9002(JW1908)#Reaction temparature:25°C|Senders(XL10Gold), T9002(JW1908)@25°C, Sender(&mu;L):Receiver(&mu;L)=500:500, 100:1000, 10:1000]]====
+
====[[Team:Chiba/Sender experiments/Senders(JW1908) T9002(JW1908)#Reaction temparature:30&deg;C|Senders(JW1908),T9002(JW1908)@30&deg;C,Sender(&mu;L):Receiver(&mu;L)=500:500,100:1000,10:1000]]====
 +
 
 +
====[[Team:Chiba/Sender experiments/Senders(XL10Gold) T9002(JW1908)#Reaction temparature:37°C|Senders(XL10Gold),T9002(JW1908)@37&deg;C, Sender(&mu;L):Receiver(&mu;L)=500:500,100:1000,10:1000]]====
 +
 
 +
====[[Team:Chiba/Sender experiments/Senders(XL10Gold) T9002(JW1908)#Reaction temparature:25&deg;C|Senders(XL10Gold), T9002(JW1908)@25&deg;C, Sender(&mu;L):Receiver(&mu;L)=500:500, 100:1000, 10:1000]]====
=== Demo ~Senders~ ===
=== Demo ~Senders~ ===
-
I experimentally tested the sender genes LuxI and LasI which produce the greatest time difference.
+
We experimentally tested the sender genes LuxI and LasI which produce the greatest time difference.
-
We mixed bacteria(XL10G) transformed with either the LuxI or LasI genes and bacteria (of the BW strain) transformed with the LuxR gene at a 1:1 ratio and visually observed GFP fluorescence.
+
We mixed bacteria (XL10Gold) transformed with either the LuxI or LasI genes and bacteria (of the strain JW1908) transformed with the LuxR gene at a 1:1 ratio and visually observed GFP fluorescence.
=== Results ===
=== Results ===
-
[[Image:Team-Chiba-demo-mihon.gif|200px|frame|left|'''Fig.4''' Demo]]<br> Green region: sender=LuxI (50 uL), Red circular region: sender=Las I (50 uL). <br>Receiver=LuxR (50 uL)
+
[[Image:Team-Chiba-demo-mihon.gif|200px|frame|left|'''Fig. 4 Demo''']]<br> Green region: sender=LuxI (50 uL), Red circular region:sender culture containing [http://partsregistry.org/Part:BBa_K084007 LasI gene](50 &mu;L).Receiver culture containing [http://partsregistry.org/Part:BBa_T9002 LuxR-plux-gfp gene] (50 &mu;L)
<gallery>
<gallery>
-
Image:Team-Chiba-demo-1.JPG|0 h
+
Image:Team-Chiba-demo-1.JPG|0 hours
-
Image:Team-Chiba-demo-2.JPG|4 h <br>(Lux I GFP detected)
+
Image:Team-Chiba-demo-2.JPG|4 hours <br>(LuxI GFP detected)
-
Image:Team-Chiba-demo-3.JPG|8 h <br>(Lux I GFP and Las I GFP detected)
+
Image:Team-Chiba-demo-3.JPG|8 hours <br>(LuxI GFP and LasI GFP detected)
-
</gallery> 
+
</gallery>Fig. 5
-
 
+
-->more about [[Team:Chiba/Demo_experiments:Senders|Demo experiments detail]]
-->more about [[Team:Chiba/Demo_experiments:Senders|Demo experiments detail]]
Line 121: Line 116:
#[http://partsregistry.org/Part:BBa_F2620:Specificity BBa_F2620:Specificity]
#[http://partsregistry.org/Part:BBa_F2620:Specificity BBa_F2620:Specificity]
#[http://mic.sgmjournals.org/cgi/content/full/153/12/3923 Paul Williams.:Quorum sensing, communication and cross-kingdom signalling in the bacterial world.Microbiology 153 (2007), 3923-3938]
#[http://mic.sgmjournals.org/cgi/content/full/153/12/3923 Paul Williams.:Quorum sensing, communication and cross-kingdom signalling in the bacterial world.Microbiology 153 (2007), 3923-3938]
 +
#[http://www.pnas.org/content/100/suppl.2/14549.full Michiko E. Taga. Bonnie L.Bassler.:Chemical communication among bacteria.PNAS.November 25, 2003,'''100'''.suppl.2]

Latest revision as of 11:00, 30 October 2008

Chiba-U.gif

Sender Crosstalk

Design

Fig. 1 Sender switch
Fig. 2 AHL varieties

Each species has their own LuxI-type proteins,which synthesize their specific autoinducers, AHLs. AHLs produced by different LuxI-type proteins differ only in the length of the acyl-chain moiety and substitution at position C-3(4).LuxR,which is original for Vibrio fischeri, is activated by its cognate autoinducer, 3OC6HSL. However, LuxR is also activated by non-endogenous molecules, C4HSL, C6HSL, and 3OC12HSL. Activation by non-endogenous molecules requires a higher signal concentration (1),(2). This results in slower activation of receivers, when AHL concentration is increasing.




Experiments

The purpose of this experiment was to create delays in communication time using cross-talk between non-specific signals. We used the following genes for this experiment.

senders (cell: XL10-Gold or JW1908) receiver (cell: JW1908)
*[http://partsregistry.org/Part:BBa_K084007 plac+rbs+LasI] (pSB1AK3)

Tet-lasi chiba.gif

*[http://partsregistry.org/Part:BBa_T9002 BBa_T9002 (Express GFP in response to AHL)] (pSB1A3)

High-Copy-Receiver Chiba.gif

*[http://partsregistry.org/Part:BBa_K084008 plac+rbs+RhlI] (pSB1AK3)

Tet-rhli chiba.gif

*[http://partsregistry.org/Part:BBa_K084009 BBa_K084009]

Tet-rhli chiba.gif

*[http://partsregistry.org/Part:BBa_K084012 plac+rbs+LuxI] (pSB1AK3)

Tet-luxi-cm chiba.gif

*[http://partsregistry.org/Part:BBa_K084014 BBa_K084014]

Tet-luxi chiba.gif

*[http://partsregistry.org/Part:BBa_S03623 BBa_S03623(ptet+rbs+LuxI(LVA))]

Chiba BBa S03623.gif

Details

Method

To characterize quorum sensing crosstalk, constitutive AHL senders were mixed with constitutive receivers and measure fluorescence intensity.

  1. Transformed Senders into E. coli strains (XL10Gold or JW1908) and Receiver into E. coli strain (JW1908).
  2. Inoculated them independently in liquid media. Incubated at 37°C for 12hours.
  3. Mixed them.
  4. Incubated at 37°C or 30°C.
  5. Measured intensity of green fluorescence (485 nm (excitation) and 527 nm (emission)) at regular time intervals.

more details...

Results & Discussion

Fig. 3 senders crosstalk test.senders strain XL10Gold,Receiver strain JW1908.Reaction temparature was 30°C.All measurements are averages from three replicate cultures with error bars representing standard deviations.Labeling:LuxI, RhlI, and LasI means fluorescence induced by AHLs synthesized by [http://partsregistry.org/Part:BBa_K084012 BBa_K084012], [http://partsregistry.org/Part:BBa_K084008 BBa_K084008], and [http://partsregistry.org/Part:BBa_K084007 BBa_K084007] respectively.

Senders(XL10Gold), T9002(JW1908)@30°C, Sender(μL):Receiver(μL)=500:500, 100:1000, 10:1000

When incubated at 30°C,E.coli strain(XL10Gold) transformed with the LasI genes produced more AHL than at 37°C.

(Green fluorescence intensity after incubating for 8 hours was:

163 at 37°C.
245 at 30°C.

3OC12HSL produced by LasI protein(expressed by[http://partsregistry.org/Part:BBa_K084007 BBa_K084007] and 3OC6HSL produced by LuxI protein(expressed by[http://partsregistry.org/Part:BBa_K084012 BBa_K0840012]) both activated LuxR protein and cousese gfp expression.The increase of green fluorescence intensity caused by 3OC12HSL was more gradualy than that caused by 3OC6HSL,time before fluorescence intensity reached at 200 was 2.5 hours longer than that of the 3OC6HSL.

Future plans

  • Reduce quantity of expression of an enzyme composing AHL
  1. Replace medium RBS with weak one.
  2. Alter the copy number of plasmids in the sender into low.
  • To make the slope of transfer curve of our device to be steep:
  1. Introduce Positive Feedback Loop into our genetic circuit.

Other Experiments

Visual Judgement

fluorescence intensity was from 150 to 200 when the 2 mL of reaction culture in a test tube.

Senders(JW1908), T9002(JW1908)@37°C, Sender(μL):Receiver(μL)=500:500, 100:1000, 10:1000

Senders(JW1908),T9002(JW1908)@30°C,Sender(μL):Receiver(μL)=500:500,100:1000,10:1000

Senders(XL10Gold),T9002(JW1908)@37°C, Sender(μL):Receiver(μL)=500:500,100:1000,10:1000

Senders(XL10Gold), T9002(JW1908)@25°C, Sender(μL):Receiver(μL)=500:500, 100:1000, 10:1000

Demo ~Senders~

We experimentally tested the sender genes LuxI and LasI which produce the greatest time difference. We mixed bacteria (XL10Gold) transformed with either the LuxI or LasI genes and bacteria (of the strain JW1908) transformed with the LuxR gene at a 1:1 ratio and visually observed GFP fluorescence.

Results

Fig. 4 Demo

Green region: sender=LuxI (50 uL), Red circular region:sender culture containing [http://partsregistry.org/Part:BBa_K084007 LasI gene](50 μL).Receiver culture containing [http://partsregistry.org/Part:BBa_T9002 LuxR-plux-gfp gene] (50 μL) Fig. 5

-->more about Demo experiments detail

references

  1. [http://www3.interscience.wiley.com/journal/119124142/abstract M.K Winson et al.:Construction and analysis of luxCDABE-based plasmid sensors for investigating N-acyl homoserine lactone-mediated quorum sensing.FEMS Microbiology Letters 163 (1998) 185-192]
  2. [http://partsregistry.org/Part:BBa_F2620:Specificity BBa_F2620:Specificity]
  3. [http://mic.sgmjournals.org/cgi/content/full/153/12/3923 Paul Williams.:Quorum sensing, communication and cross-kingdom signalling in the bacterial world.Microbiology 153 (2007), 3923-3938]
  4. [http://www.pnas.org/content/100/suppl.2/14549.full Michiko E. Taga. Bonnie L.Bassler.:Chemical communication among bacteria.PNAS.November 25, 2003,100.suppl.2]