Team:BCCS-Bristol/Protocols-Agarose Gel Electrophoresis

From 2008.igem.org

(Difference between revisions)
 
(2 intermediate revisions not shown)
Line 1: Line 1:
-
<html><link rel="stylesheet" href="http://www.chofski.co.uk/iGEM/bccs-igem.css" type="text/css"></html>
+
<html><link rel="stylesheet" href="http://homepage.mac.com/tgorochowski/iGEM/bccs-igem.css" type="text/css"></html>
__NOTOC__
__NOTOC__
<div class="bccsNavBar">
<div class="bccsNavBar">
Line 26: Line 26:
# Pour the gel into a chamber with a comb that you prepared before
# Pour the gel into a chamber with a comb that you prepared before
# Let the gel cool down and become solid (15-20 min)
# Let the gel cool down and become solid (15-20 min)
-
 
===Sample preparation: ===
===Sample preparation: ===
Line 32: Line 31:
# Add 10 % “Sample Loading Buffer” (BIORAD) to the sample
# Add 10 % “Sample Loading Buffer” (BIORAD) to the sample
# Mix gently and spin shortly down
# Mix gently and spin shortly down
-
 
===Loading the gel: ===
===Loading the gel: ===

Latest revision as of 20:40, 13 September 2008

Agarose Gel Electrophoresis

Gel preparation:

  1. For a thick gel in a small chamber, boil 50 ml 0.5x TBE in the microwave (for a thinner gel to insert only 5 µl sample in each well 40 ml are sufficient)
  2. Cool the solution until you can touch it with your hands for a longer time
  3. Add 0.5 µl ethidium bromide per 10 ml TBE and mix while avoiding air bubbles
  4. Pour the gel into a chamber with a comb that you prepared before
  5. Let the gel cool down and become solid (15-20 min)

Sample preparation:

  1. Add 10 % “Sample Loading Buffer” (BIORAD) to the sample
  2. Mix gently and spin shortly down

Loading the gel:

  1. Remove the comb and put the gel with the slide into a chamber (the wells need to be on the end with the black pole!!!)
  2. Fill the chamber with 0.5x TBE until the gel is covered
  3. Use 5 µl HyperLadderI (BIOLINE)
  4. For colony PCR, put 5 µl of each reaction in the well
  5. Close the chamber with the lid (black pole to black=negatively charged and red to red=positively charged…)
  6. Run the gel with 80-100 V


The Sample Loading Buffer contains two dyes: Bromophenol blue runs at ~300 bp and Xylene cyanol FF runs at ~4 kb.

BCCS-080812-HyperLadderI for electrophoresis.PNG