Team:Hawaii/PCR Amplification of pRL1383a

From 2008.igem.org

(Difference between revisions)
m
m (→Follow-up Experiments)
Line 216: Line 216:
*7/2/08:  
*7/2/08:  
*#A second attempt was made to PCR the rep region. An annealing temperature of 53.4° was used for the first 5 cycles and annealing temperature 60.6 was used for the subsequent 30 cycles.  
*#A second attempt was made to PCR the rep region. An annealing temperature of 53.4° was used for the first 5 cycles and annealing temperature 60.6 was used for the subsequent 30 cycles.  
-
*#Results:  
+
*#Results: There are 2 faint bands in the low kb region. This is probably primers.
[[Image: repPCR_7_2_08.JPG|right|thumb|Lane 1 contains the ladder, lanes 3 through 6 contain the products of a plasmid prep,  <strong>lane 7 contains the PCR of the rep region</strong>, while lanes 8 and 9 are the positive and negative control, respectively. Lane 10 contains one of NW's PCR reactions.]]
[[Image: repPCR_7_2_08.JPG|right|thumb|Lane 1 contains the ladder, lanes 3 through 6 contain the products of a plasmid prep,  <strong>lane 7 contains the PCR of the rep region</strong>, while lanes 8 and 9 are the positive and negative control, respectively. Lane 10 contains one of NW's PCR reactions.]]
-
 
+
*#Discussion: The rep region did not amplify under these conditions. There were several [[Team:Hawaii/Meeting/2008-07- 3|suggestions]] made by the professors that I will try this weekend.
* What was learned and how to do future experiments differently.
* What was learned and how to do future experiments differently.
<blockquote>''Insanity is doing the same thing over and over again and expecting different results.'' - Albert Einstein</blockquote>
<blockquote>''Insanity is doing the same thing over and over again and expecting different results.'' - Albert Einstein</blockquote>
{{Team:Hawaii/Footer}}
{{Team:Hawaii/Footer}}

Revision as of 00:51, 4 July 2008

Projects Events Resources
Sponsors Experiments Milestones Protocols
Notebook (t) Meetings (t)

Contents

PCR Amplification of pRL1383a

  • Several regions of pRL1383a will be amplified with BioBrick based primers. These components will be used later in the construction of a pRL1383a BioBrick based vector. These parts include the aadA region of the omega interposon, the origin of vegetative replication (oriV), the mobilization proteins, and the replication proteins.

Methods

Materials Per Reaction Added in order:

  • 3.5uL nanopure water
  • 1uL 10uM forward/reverse primers
  • 1uL pRL1383a as template (1:10 dilution of [Team:Hawaii/Header: Large-Scale Plasmid Prep from E. coli| large-scale plasmid prep].
  • 5uL Taq polymerase: Accusure(hot start, 68°C) and Red Taq

Note: the taq and water can be combined and aliquoted together as long as reaction is kept at 4°C.

  • cold blocks
  • pcr reaction tubes, with tops
  • pipette and tips
PCR Running Conditions
Duration of Time T° 5 cycles T° 30 cycles Purpose
10 minutes 95°C 95°C heat activate taq
30 seconds 95°C 95°C denaturation
30 seconds 48.1°C, 53.4°C, 57.9°C 59°C, 60.6°C, 61.9°C annealing
5 minutes 68°C 68°C extension (1.5 minutes per kb, go with longest)
10 minutes 68°C 68°C finishing the extension
infinity 4°C 4°C (until you remove product)

Materials for the gel

  • 1% agarose gel
  • 10ug/mL Ethidium Bromide
  • running apparatus
  • gel running conditions: 95V for ~1 hour

Results

PCR Gel 1 (left) and PCR Gel 2 (right).
PCR Gel 1
Lane Contents Description Predicted annealingT°C,5 cycles Predicted annealing T°C,30 cycles
1 Tri-dye 10kb ladder ok
2 omega (aadA)#1 (+), ~1kb 54.4,50.4 60.7,69.5
3 oriV #1 (+), ~0.5kb 51.3, 53 60.9, 71.2
4 mob #1 smear 53.5, 48 62, 69.8
5 rep #1 smear, low kb 53.9, 57.2 59.1, 73.5
6 (-)control all clear
7 (+) control bright band, ~0.5kb
8 omega #2 (+), ~1kb 54.4,50.4 60.7,69.5
9 oriV #2 (+) ~0.5kb 51.3, 53 60.9, 71.2
10 mob #2 nothing, slight smear 53.5, 48 62, 69.8


PCR Gel 2
Lane Contents Description Predicted annealing T°C,5 cycles Predicted annealing T°C,30 cycles
1 Tri-dye 10kb ladder no ladder
2 rep#2 light smear 53.9, 57.2 59.1, 73.5
3 (-)control all clear
4 (+)control bright band ?0.5kb
5 omega #3 bright band, ?1kb 54.4,50.4 60.7,69.5
6 oriV #3 bright band, 0.5kb? 51.3, 53 60.9, 71.2
7 mob light band, some smear, 3kb? 53.5, 48 62, 69.8
8 rep #3 band in low kb 53.9, 57.2 59.1, 73.5
9 (-) control all clear
10 (+) control bright band, 0.5kb?

Discussion

  • The gels are very warped. I did not let them dry long enough before I poured the running buffer,so some products did not run correctly therefore this experiment will be repeated on Monday when the necessary reagents are delivered.
  • I mixed up the temperature gradient!!! I need to be more careful about labeling my reactions.
  • The rep protein did not come out at all and the mob region only came out at one temperature, so these must be PCRed again to determine the correct annealing temperature.

Follow-up Experiments

  • 7/2/08:
    1. A second attempt was made to PCR the rep region. An annealing temperature of 53.4° was used for the first 5 cycles and annealing temperature 60.6 was used for the subsequent 30 cycles.
    2. Results: There are 2 faint bands in the low kb region. This is probably primers.
Lane 1 contains the ladder, lanes 3 through 6 contain the products of a plasmid prep, lane 7 contains the PCR of the rep region, while lanes 8 and 9 are the positive and negative control, respectively. Lane 10 contains one of NW's PCR reactions.
    1. Discussion: The rep region did not amplify under these conditions. There were several suggestions made by the professors that I will try this weekend.
  • What was learned and how to do future experiments differently.
Insanity is doing the same thing over and over again and expecting different results. - Albert Einstein


[http://manoa.hawaii.edu/ Sponsor_UHM.gif][http://manoa.hawaii.edu/ovcrge/ Sponsor_OVCRGE.gif][http://www.ctahr.hawaii.edu Sponsor_CTAHR.gif]

Retrieved from "http://2008.igem.org/Team:Hawaii/PCR_Amplification_of_pRL1383a"