Team:ETH Zurich/Modeling/Genome-Scale Model

Genome Scale Analysis

In the Restriction Enzymes Analysis modeling section we deal with the analysis of restriction enzymes effects on the genome from the simple point of view of nucleotide sequences and cutting patterns. This is not informative enough when we try to understand if the key principles of reduction and selection at the base of our minimal genome approach are valid in the context of the whole cell response. It is evident that our selection method for smaller genome size strains is based on the assumption that is possible to control growth rate as a function of its genome size. As explained in the Project Overview, we put a selective pressure on the genome size by combining two effects together: the random reduction of the genome size by restriction enzymes cutting and the feeding of a limited amount of thymidine on a thymidine auxotrophic strain.In this context, one should also consider the effects that the loss of chromosomal parts may have on the physiology of the cell. This scenario needs to be validated using modeling techniques that relate genome content and substrate availability with cell physiology on a system level. Fortunately, in the last ten year huge progress in coding our understanding of biological networks into whole cell comprehensive stoichiometric models. This model typology is called genome scale modeling and we use the most updated genome scale model for our working strain (E. coli K12 MG1655) in order to answer the following questions:

• Is it possible to slow the growth of a strain by using a thymidine auxotrophic strain and limiting thymidine feeding? How is the thymidine uptake rate (as a function of the thymidin concentration in the medium) quantitatively related to the growth rate in an auxotrophic strain?
• What is the quantitative effect on growth rate when reducing the genome size of wild type strain (under the assumption of not losing any functionality)?
• What is the combined effect of thymidine limitation and genome reduction on growth rate? Is it possible to identify the best initial and running settings?
• What are the best restriction enzymes to be used in order to maximize genome reduction and vitality (growth rate) of thymidine auxotrophic strains simultaneously?
• What is the predicted genome reduction difference if the cell are grown in minimal or rich medium (in term of nutrients)?
• What are the differences compared with alternative approaches to our reduction and selection methods such as random search or targeted knockout strategy?

These questions are answered below, in the respective sections. As first we introduce the genome scale model concepts, the Flux Balance Analysis theory and in particular the iAF1260 E.Coli Genome Scale Model developed by [http://gcrg.ucsd.edu/|the Palsson's Group at UCSD], that we modified and used. In the following sections we show the results of simulations for the different questions to be answered.

Genome Scale Models, FBA and E.Coli K12 MG1655

Genome scale models (1) are biological network reconstructions that effectively map genome annotations (ORFs) to biochemical reactions that define the metabolic network specific to a particular organism. They are also called stoichiometric models because they encode calculation of quantitative relationships of the reactants and products in the balanced biochemical reactions in the organism. When they are enough informative to cover a consistent part of the known organism functions are called in-silico organisms, bacause it is possible to use them as models to simulate cell system responses. Genome scale models are used in combination with Flux Balance Analysis in order to predict the physiology (growth rate, uptake rates, yields etc..) of the in-silico organism depending on variable external nutrient conditions or changes in genome composition (in-silico knockout experiments). In the last decade this modeling technique has proved to give consistent results with experimental data under various heteregeneous conditions of testing (4). Mathematically, Flux Balance Analysis uses the stoichiometric information in order to predict the metabolic flux distribution under the assumption of maximization of a particular cell process (for example maximizing biomass production). Denote N as the stochiometric matrix, V the vector of fluxes and consider the Flux Balance Analysis- assumiption:

The flux solution can be then computed according to a maximization (or the corresponding minimization) function:

Once the metabolic fluxes are known,it is possible to calculate physiology parameters. For a complete introduction to these concepts please read this [http://www.nature.com/nbt/web_extras/supp_info/nbt0201_125/info_frame.html Genome Scale Models introduction].
Focusing on the organism of our interest, the E. coli in silico organims we use is iAF1260 (2) and includes the genes involved in central metabolism, amino acid metabolism, nucleotide metabolism, fatty acid and lipid metabolism, carbohydrate assimilation, vitamin and cofactor biosynthesis, energy and redox generation, and macromolecule production (i.e. peptidoglycan, glycogen, RNA, and DNA). In order to give a flavour about the pathways included in the model we post the graphical representation of reactions and metabolits that has been produced for the previous model version (4). Click on the images to enlarge.

Central Metabolism

Amino Acid Metabolism

Cell Membrane

Cofactor Biosythesis

Nucleotide Metabolism

Alternative Carbon Sources

Overall the iAF1260 model contains:

• 2382 elementary reactions.
• 1668 metabolites.
• 1261 ORF.

In order to use the pubblished model, we modified its structure (for knockouts experiments). And in order to run Flux Balance Analysis we relied on the Cobra Toolbox (3), a free MATLAB ToolBox also published by the [http://gcrg.ucsd.edu/|the Palsson's Group at UCSD]. We are thankful for the sharing of this great work and give them the credits for this useful tool.

Different mediums

As explained in the Project Overview section, the minimal genome, apart of the non-uniqueness, is also dependends on the enviromental conditions. In particular, bacteria have evolved a complex system of regulation in order to express genes depending on the avaiability of one or the other substrate. So, it results that both, the size and the identity of genes in the minimal genome, will vary of a certain (probably significant) extent. In order to test this prediction using genome scale models, we prepared two different in-silico media. The first one is a rich medium that simulates (as guideline) the content of LB medium, apart from the nucleotides that are not present in order to not disturb the selection mechanism. The second one is a minimal medium, that has glucose as carbon source. Here below we report the composition of our in-silico mediums and their availability:

• Minimal medium: glucose 0.8 mMol/(h*gDW); oxygen 18.5 mMol/(h*gDW); thymidine is variable; cob(II)alamin 0.0100 mMol/(h*gDW).

• Rich medium: glucose 0.8 mMol/(h*gDW), oxygen 18.5 mMol/(h*gDW), thymidine is variable, cob(II)alamin 0.0100 mMol/(h*gDW), alanine, aspartic acid, glutamic acid, glutamine, histidine, glycine, leucine, methionine, proline, threonine, tryosine, trginine, cystine, isoleucine, lysine, phenylalanine, serine, tryptophan, asparagine, sulfate, phosporus (phosphote), zinc, cadmium, mercury, ammonia are not limited.

Then we performed growth simulations of the wild type strain and obtained maximal growth rate of 0.7367 1/h in minimal medium and 1.1 1/h in rich medium, in good accordance with experimental values. After having assessed these two possible conditions of growth, we can test how the cells respond to the different availability in nutrients.

Thymidine limitation effects on growth rates

The iAF1260 in-silico model mimics the metabolic network of a wild type E.Coli strain K12 MG1655. In order to simulate what is the cell response when thymidine auxotrophic and under a thymidine limitation, we modified the model by performing an in-silico knockouts of the THyA gene and introducing an external uptake reaction for thymidine. The picture below shows the modifications:

The reaction termed TDMS is the thymidylate synthase reaction and has been removed from the model. The resulting model is non vital (growth rate is zero) for medium that do not contain nucleotides, according to experimental tests. The reaction TMDt2 has been set up to uptake a defined amount of thymidine from the medium. In this way the reaction that needs the nucleotides in order to produce biomass has a positive influx and rightly simulate cell growth. Then we performed simulations varying the thymidine uptake rate of cells on two different background medium conditions, under minimal and rich medium. The plots below demonstrate that thymidine limitation can be used to control the maximum growth rate of cells.

Minimal medium Figure 2.

Rich medium Figure 3.

In particular, the simulations show that the growth rate is controlled linerly by the thymidine uptake rate below a threshold that depends on the medium composition and then it is not anymore effective when the growth rate is already maximal. The threshold value is 0.019 (mMol/(gDW*h)) for the minimal medium, it is 0.028 (mMol/(gDW*h)) for the rich medium. These predictions are useful for us in order to understand the thymidine concentrations for our selection mechanism.

Genome size effects on growth rates

Nucleotides biosynthesis used in replication of the chromosome are part of the costly processes that a cell has to perform in order to duplicate. We were curious to investigate which kind of advantage would have a cell if this nucleotide synthesis was reduced, under the hypothesis that the full functionality of the cell was not modified. So using the genome scale model, we calculated the maximun growth rate that cells growing on two different medium could have on different genome sizes. Here below the simulated results:

As expected, a simple reduction in genome size has a very small effet on the growth rate, and only in case of big reductions.

Growth rates as output of whole cell system behaviour

In order to understand the response of thymidine auxotrophic cell to thymidine limitation when the genome size changes, we performe simulations using Flux Balance Analysis. In this context, we were interested only in quantifying the effect of chromosomal reduction, without considering the possibility of having lost any gene in the operation of reduction. We made the thymidine concentration possible from 0 to 3 mmMol/(gDW*h) and the chromosome size from 0 to the double of E.Coli wild type genome size (4.7 Mbp). Here below we present the two three dimensional plots that describe the cell's response under minimal and rich medium nutrient conditions.

The plots are very informative regarding to the effectiveness of our selection method. In fact, they show how to tune the thymidine concentration in the medium in order to obtain the best selection sensitivity (difference in growth rate between similar genome sizes) for a particular range of genome. As highlighted by the red circles, starting from the wild type strain chromosome size (4.7 Mbp) we can calculate the uptake rate of thymidine (0.022 mMol/(gDW*h) in minimal medium and 0.026 mMol/(gDW*h) in rich medium) by projecting the orthogonal arrows. Thus, graphs show that is possible to mantain cells in a very fast growing condition (above a growth rate of 0.8 in rich medium and above 0.5 in minimal medium) all over the selection procedure, just by following the gradient (of decreasing thymidine concentration) that gives the higher growth rates while decreasing the genome size due to effects of the reduction procedure (red arrow in both graphs).

Comparing minimal genomes in different medium

We implemtented a simulation algorithm that mimic our reduction approach and selection mechanism. Since we were interested in understanding how much of the genome we could predict to remove using our approch, we constructed an hypotetical strain that contains only the genes modelled in the genome scale model. This because almost the 70% of the real E.coli genome is not accouted for in the model (that is, genes are missing in the reconstruction). So we modelled computationally this E.coli strain that has 1260 genes that reside on a chromosome of 1.3 Mbp size. In this way we assume to be able to project our reduction results on the real complete E.coli strain without any bias.

In our simulation we introduced some abstractions, such as the assumption that from each pulse of restriction enzyme expression to the other, we were able to select and bring to the next generation only the fast growing strain. Moreover we assumed that the probability of each fragment to be cut off the chromosome was constant and indipendent. In this simulation we setted it to 0.01, while we wait to have an estimation for the proof of concept experiment that is explained in the lab part, under Genome Reduction section. Our paramter corresponds to the term CE*RLE in that section. Then we runned the algorithm using the E.coli genome scale model on two different medium, the rich and the minimal ones. Here we give a brie description of the algorithm.

Starting from the wild type cell, we computed a continuous cicle of reduction and selection. For the reduction step, we sampled the probability of each fragment to be cut out from the chromosome and performed the corresponding single knockout simulation for each of the one that sampled as positive. From this population of knockout strains obtained, we calculated each individual growth rate and brought to the next generation only the one with the bigger one (abstracting thus all the selection procedure of the chemostat mechanism in one single step). Then using only the survived strain, we repeated the step of reduction and selection, until it was found that no one of the random mutation lead to a faster growing strain. All over the simulation, the best reduction obtained (that is, the strain that survived the selection) at each step was stored and is visualized in the plot above. We synchronized the runs for different medium on the number of fragments cut that were attempted in order to obtain that best current reduction.

Even if the figure above is only one of the possible random walks that search for the minimal genome in the vast existing solution space, it is quite informative. It is possible to observe how the algorithm (under the previously described assumptions) has a linear relation when comparing genome size reduction with the number of fragment cut attempted. It is possible to see that it predicts a final reduction for a strain growing in rich medium of the 71% of wild type genome size, while it is of 59% for the strain growing in minimal medium. This corresponds in terms of genes in a reduction of 73% in the rich medium case and of 61% in the minimal medium. The simulation assumed the strain growing in minimal medium to be uptaking thymidine with a constant rate of -0.002 (mMol/gDW*h) while the strain growing in reach medium to be uptaking thymidine with a constant rate of -0.003. The growth rate of the strain without reduction was of 0.33 (1/h) in minimal medium condition and 0.25 (1/h) under rich medium condition. The reducted strain obtained at the end of the simulation had respectively a growth rate of 0.54 (1/h) and 0.61 (1/h), so fully in the range of detection of our chemostat selection mechanims.

References

(1) "Thirteen Years of Building Constraint-Based In Silico Models of Escherichia coli" ,Jennifer L. Reed and Bernhard Ø. Palsson, Journal of Bacteriology, May 2003, p. 2692-2699, Vol. 185, No. 9
(2) "A genome-scale metabolic reconstruction for Escherichia coli K-12 MG1655 that accounts for 1260 ORFs and thermodynamic information", A.M. Feist et al., Molecular Systems Biology 3:121
(3) "Quantitative prediction of cellular metabolism with constraint-based models: the COBRA Toolbox", S.A. Becker et al., Nature Protocols, 2007
(4) "In silico predictions of Escherichia coli metabolic capabilities are consistent with experimental data.", Edwards JS, Ibarra RU, Palsson BO (2001), Nat Biotechnol, 19: 125–130.