"
Team:Illinois/Antibody GPCR Fusion Notebook
From 2008.igem.org
| Home | Team | Project | Notebook | Research Articles | Parts | Protocols | Pictures |
Recipes
- Tris-Cl, 1M
- Dissolve 121g Tris base in 800ml H2O
- Adjust to desired pH with concentrated HCl
- Mix and add H2O to 1 liter
- (Approximately, 20ml HCl for pH 7.4 and 42ml for pH 8.0)
- EDTA, 0.5M (pH 8.0)
- Dissolve 186.1g Na2 EDTA-2H2O in 700ml H20
- Adjust pH to 8.0 with 10M NaOH(~50ml)
- Add H2O to 1 liter
- Breaking buffer - 100ml
- 2ml Triton X-100
- 1ml Sodium dodecyl sulfate (SDS)
- 0.5844g NaCl (100mM)
- 1ml 1M Tris-Cl pH 8.0 (10mM)
- 200uL 0.5M EDTA (1mM)
22nd July
- Yeast obtained from Dr. Zhao
- W303a S. Cerevisiae
24th July
- Prepared liquid culture for DNA extraction
- Made 1M Tris. Cl pH 8.0
- Made 4M ammonium acetate
22nd August
- Attempted DNA extraction of W303a genomic DNA
- Protocol from Wiley's Current Protocols in Molecular Biology
- Result: Failed to finish protocol
- Obtained more yeast from Dr. Zhao
- W303a S. cerevisiae
25th August
- Prepared overnight culture for DNA extraction (3:27pm)
26th August
- Attempted DNA extraction
- Prepped overnight culture
27th August
- Performed PCR: PGK Terminator
| Buffer G | 12.5uL | x4 | 50uL | |
| Forward Primer | 0.5uL | x4 | 2uL | |
| Reverse Primer | 0.5uL | x4 | 2uL | |
| H2O | 10.8uL | x4 | 43.2uL | |
| Taq | 0.2uL | x4 | 0.8uL | |
| template | 0.5ul | |||
| Negative control | 3 H2O | |||
- PCR program:
- 4 min 94 degrees
- 25-30x 30s 94 degrees
- 30s Tm primers
- 1 min/KB 72 degrees
- 7 min 72 degrees
- For the gel: 5uL loading dye gel is in cold room
- Prepped 3 overnight cultures
28th August
- Extracted DNA from 4 cultures
- Ran gel of PCR products (1.5% agarose, 200V)
- Result: No bands present
2nd September
- PCR: PGK Terminator
| 5 PRIME Mastermix | 10uL | x3 | 30uL |
| Forward Primer | 0.5uL | x3 | 1.5uL |
| Reverse Primer | 0.5uL | x3 | 1.5uL |
| Template | 10uL | x3 | 30uL |
| H2O | 10.8uL | x4 | 43.2uL |
| Negative control | 25uL H2O |
3rd September
- Ran gel
- Ladder lane 7
- Sample 7 spilled
- 1% agarose
- 120V
- Too low
- 50 minutes
- Poor results--no bands present
8th September
- PCR: PGK Terminator
| 5PRIME Mastermix | 10uL | x3 | 30uL |
| Forward Primer | 0.5uL | x3 | 1.5uL |
| Reverse Primer | 0.5uL | x3 | 1.5uL |
| Template | 14uL | x3 | 42uL |
- Prepped 4 overnight cultures
- Yeast dried out again
9th September
- Signs of life in 3 of the cultures
- Wait until tomorrow
- Ran gel on PCR from 8th September--no bands present
- 150V, 50 minutes
- No sign of DNA
- Ladder from Courtney
10th September
- Split culture
- Ran gel from 8th September again--no bands present
- 150V, 50 minutes
- 0.75% gel
- Ladder from Courtney
11th September
- PCR: PGK Terminator
| 5 PRIME Mastermix | 10uL | x3 | 30uL |
| Forward Primer | 0.5uL | x3 | 1.5uL |
| Reverse Primer | 0.5uL | x3 | 1.5uL |
| Template | 14uL | x3 | 42uL |
12th September
- Isolated genomic DNA from 8 cultures of W303a yeast cells
- Protocol from Wiley's Current Protocols in Molecular Biology
- Labeled templates 1,2,3,4 and 1a,2a,3a,4a
- Ran gel of PCR from 11th September
- 1% agarose
- 150V
- 38 mins
- Poor results
15th September
- PCR PGK Promotor
- Finnzymes Phusion High Fidelity DNA Polymerase
- F-530, 20V (2V/uL)
- Finnzymes Phusion High Fidelity DNA Polymerase
| 5x Phusion HF Buffer | 10uL | x3 | 30uL |
| 10mM dNTPs | 1uL | x3 | 3uL |
| Primer A(Forward) | 1uL | x3 | 3uL |
| Primer B(Reverse) | 1uL | x3 | 3uL |
| Template 1 | 10uL | x3 | 30uL |
| Phusions DNA polymerase | 0.5uL | x3 | 1.5uL |
| H2O | 26.5uL | x3 | 79.5uL |
18th September
- Ran reaction mentioned on 15th September
- Extracted DNA from gel from 8th September (PGK Terminator)
| Tube | Gel(g) |
| 1 | 0.332 |
| 2 | 0.278 |
| 3 | 0.307 |
| 4 | 0.349 |
| 5 | 0.385 |
19th September
- Gel of PGK Promotor from 15th September has no DNA present
23rd September
- PCR: Fus1 Downstream
- EPICENTRE Bioetechnologies - MasterAmp(TM) Taq DNA Polymerase
- Per 50uL of reaction,
| MasterAmp Taq 10x PCR Buffer | 5uL |
| 1mM dNTPs | 1uL |
| Primer 1 | 0.5uL |
| Primer 2 | 0.5uL |
| 25mM MgCl2 | 2uL |
| Taq DNA Polymerase | 0.25uL |
| Template 2 | 20uL |
| Water | 20.75uL |
- PCR Settings:
- 4mins, 94 degree celcius
- 30s, 94 degree celcius
- 30s, 5 degrees below primer melting temperature
- 1 min, 72 degree celcius -- to step 2 -- 30x
- 7 min, 72 degree celcius
24th September
- Ran gel of Fus1 Downstream from 23rd September
- Result: No DNA present on gel
25th September
- PCR: Fus1 Upstream
| Mastermix | 8.25uL | x3 | 24.75uL |
| Forward Primer | 0.5uL | x3 | 1.5uL |
| Reverse Primer | 0.5uL | x3 | 1.5uL |
| Template 3 | 20uL | x3 | 60uL |
| Water | 20.75uL | x3 | 62.25uL |
- same protocol as 23rd September
- The master mix contains the buffer, dNTPs, MgCl, and Taq
- Template 3 (3 reactions run)
30th September
- PCR: Fus1 Upstream
| Mastermix | 8.25uL | x3 | 24.75uL |
| Forward Primer | 0.5uL | x3 | 1.5uL |
| Reverse Primer | 0.5uL | x3 | 1.5uL |
| Template 3 | 20uL | x3 | 60uL |
| Water | 20.75uL | x3 | 62.25uL |
- same protocol as 23rd September
- Template 4 and 1a (3 reactions each)
- Gel: 1% agarose, 150V, 35 minutes -> poor results
- lanes 2,3 -> faint smear
1st October
- PCR: Ste2
| Mastermix | 8.25uL | x3 | 24.75uL |
| Forward Primer | 0.5uL | x3 | 1.5uL |
| Reverse Primer | 0.5uL | x3 | 1.5uL |
| Template 3 | 20uL | x3 | 60uL |
| Water | 20.75uL | x3 | 62.25uL |
- same protocol as 23rd September
- Templates 2a, 3a, 4a used (3 reactions each)
3rd October
- Ran Ste2 gel from 1st October
8th October
- PCR: PGK Terminator
| PCR Buffer | 5uL |
| 10mM dNTPs | 1uL |
| Forward Primer | 1uL |
| Reverse Primer | 1uL |
| MgCl2 | 5uL |
| Taq DNA Polymerase | 0.25uL |
| Template | 25uL |
| Water | 11.75uL |
- same protocol as 23rd September
- Use DNA extracted from gel on 18th September (5 reactions)
- Also extracted DNA from gel from 30th September (Fus1 Upstream)
9th October
- PCR: Ste2
- Protocol is the same as 23rd September
- Template used is product from 1st October (9 reactions total)
- PCR: Fus1 Upstream
- Protocal matches 23rd September
- Template used was DNA extracted from the gel from the 8th October, which came from the PCR run on 30th September (5 reactions total)
- Ran Ste2 gel from today
- Ran PGK terminator gel from yesterday
12th October
- PCR: Fus1 (3 reactions each)
- Template is products from 9th October
13th October
- Ran gel of PCR with Fus1
- Used 25uL or product, 5uL of loading dye
14th October
- Fus1 PCR
| MasterAmp Taq 10x PCR Buffer | 5uL |
| 1mM dNTPs | 1uL |
| Primer 1 | 0.5uL |
| Primer 2 | 0.5uL |
| 25mM MgCl2 | 5uL |
| Taq DNA Polymerase | 0.25uL |
| Template | 25uL |
| Water | 11.75uL |
- Template is reaction from 12th October
15th October
- PCR PGK Terminator
| 5 PRIME MasterMix | 20uL |
| Primer Fwd | 0.5uL |
| Primer Rev | 0.5uL |
| Template | 25uL |
| Water | 4uL |
- Ran gel of Ste2 from 10/14
- Ran gel of Fus1 upstream from 10/14 (no ladder, oops)
16th October
- PCR: Fus1 Downstream, PGK Promoter
| MasterMix | 20uL |
| Primer Fwd | 0.5uL |
| Primer Rev | 0.5uL |
| Template | 20uL |
| Water | 9uL |
- Tube 1: Template 4 - Fus1
- Tube 2: Template 4a - Fus1
- Tube 3: Template 4 - PGK Promoter
- Tube 4: Template 4a - PGK Promoter
- ran Gel of above
- Extracted Ste2 from 10/15 and re-amplified:
| MasterMix | 20uL |
| Primer Fwd | 0.5uL |
| Primer Rev | 0.5uL |
| Template | 20uL |
| Water | 9uL |
17th October
- Ran gel of Ste2 from 10/16
- Tube 1 - lane 2,3
- Tube 2 - lane 5,6
- PCR: Fus1
| MasterMix | 20uL |
| Primer Fwd | 0.5uL |
| Primer Rev | 0.5uL |
| Template | 20uL |
| Water | 9uL |
- PCR: PGK Terminator
| MasterMix | 20uL |
| Primer Fwd | 0.5uL |
| Primer Rev | 0.5uL |
| Template | 20uL |
| Water | 9uL |
- Extracted Ste2(Gel from today)
20th October
- Extracting chromosomal DNA from yeast cells
- W303A - Yellow
- YPD DL
- YHP1 YPD HD - One is orange (YHP1)(Cap was removed in incubator), Other is Yellow
- Orange - YHP1 YPD HD
- Green - YHP2 YPD HD
- Pink - W303A YPA DL
- Yellow - WD303A YPD DL
21st October
- PCR: Ste2
| MasterMix | 20uL |
| Primer Fwd | 0.5uL |
| Primer Rev | 0.5uL |
| Template | 20uL |
| Water | 9uL |
- 2 tubes
- Block B of black machine
- Annealing temperature: 31 degrees celcius
- Ran gel on Ste2 from today\
22nd October
- New primers for biobricks are here
- Brought to standard concentration, 30uM
- Added 33.3uL of water per nmol primer
- PCR: Fus1 and PGK Terminator
| MasterMix | 20uL |
| Primer Fwd | 0.75uL |
| Primer Rev | 0.75uL |
| Template | 25uL |
| Water | 3.5uL |
- Forward and Reverse primers are new biobrick primers that arrived today
- Template is PCR product from 17th October
- A,B,C -> Fus1 Upstream -> 1,2,3
- 1,2 -> PGK Terminator -> 4,5
- Annealing temperature: 38 degrees celcius
- In freezer in yellow case
- PCR: Ste2
| MasterMix | 20uL |
| Primer Fwd | 0.5uL |
| Primer Rev | 0.5uL |
| Template | 25uL |
| Water | 4uL |
- Forward primer, Reverse Primer are new primers that arrived today
- Template is PCR product from 21st October
- Two tubes in block B
- The 3 gels in the cold room do not have EtBr
23rd October
- Ran gel of Fus1 Upstream, PGK Terminator, Ste2 from yesterday
- 1% Agarose
- PCR: Fus1 Downstream, PGK Promoter
| MasterMix | 20uL |
| Primer Fwd | 0.5uL |
| Primer Rev | 0.5uL |
| Template | 20uL |
| Water | 9uL |
- 4 reactions each of Fus1 Upstream(1,2,3,4) and PGK Promoter(A,B,C,D)
- PCR: Fus1 Downstream, Fus1 Upstream, PGK Promoter, PGK Terminator, Ste2
- Template from 20th October; isolate DNA (x4 different reactions), except Ste2
- Used all Template
| MasterMix | 20uL |
| Primer Fwd | 0.5uL |
| Primer Rev | 0.5uL |
| Template | 20uL |
| Water | 9uL |
| Home | Team | Project | Notebook | Research Articles | Parts | Protocols | Pictures |
