Team:University of Washington/Project

From 2008.igem.org

(Difference between revisions)
(Sub#2: Signaling Module - Biosynthesis of the AHL distress signal (in Yeast))
Line 88: Line 88:
==Sub#2: Signaling Module <font size="2"><b>- Biosynthesis of the AHL distress signal (in Yeast)</b></font>==
==Sub#2: Signaling Module <font size="2"><b>- Biosynthesis of the AHL distress signal (in Yeast)</b></font>==
 +
[[Image:uwAHL.gif]]
Ultimately, our goal is to place bacterial conjugation under the control of an external distress signal from a metabolically-stressed yeast cell. Thus, it is necessary to engineer ''S. cerevisiae'' to produce the AHL signaling molecule. Our proposed method to accomplish this is to clone the AI synthase gene (BBa_C0161) into a nonstandard yeast expression plasmid, which should theoretically result in the conversion of amino acid precursors into the AHL molecule. To test whether the yeast transformants are indeed capable of AHL signaling, they can be tested in co-culture with the AHL receiver cells (BBa_T9002). Although AHL production will initially be under control of a constitutive promoter, eventually we may place it under control of a glucose-repressible promoter such as pJEN1 [3], so that the yeast will produce AHL proportionally in response to glucose starvation.
Ultimately, our goal is to place bacterial conjugation under the control of an external distress signal from a metabolically-stressed yeast cell. Thus, it is necessary to engineer ''S. cerevisiae'' to produce the AHL signaling molecule. Our proposed method to accomplish this is to clone the AI synthase gene (BBa_C0161) into a nonstandard yeast expression plasmid, which should theoretically result in the conversion of amino acid precursors into the AHL molecule. To test whether the yeast transformants are indeed capable of AHL signaling, they can be tested in co-culture with the AHL receiver cells (BBa_T9002). Although AHL production will initially be under control of a constitutive promoter, eventually we may place it under control of a glucose-repressible promoter such as pJEN1 [3], so that the yeast will produce AHL proportionally in response to glucose starvation.

Revision as of 09:54, 28 October 2008

WashingtonColorSeal-21-clip.gif Home The Team The Project Modeling Notebook Protocols Parts Submitted
to the Registry
Measurement Kit SeToB Safety

Contents

Introduction: Controlled Trans-Kingdom Genetic Transfer

Certain bacteria exhibit a means of horizontal gene transfer called conjugation that contrasts with traditional heritable genetics. Specifically, the mechanism of bacterial conjugation does not rely on the transfer of genetic information from parent to progeny. Instead, a unique type of plasmid induces the replication and transmission of itself or other plasmids, called shuttle plasmids between bacteria via direct cell-to-cell contact. The genes on the conjugative plasmid encode for a suite of enzymes and structural proteins, including a sex pilus nanotube that connects the bacteria and accommodates the transmission of DNA. In this manner, bacteria can accept and express genes separate from their chromosomal DNA. This mode of genetic transfer is fascinating on many levels, including its possible role in evolution and phylogenetic discrepancies, it has the potential to be utilized as an invaluable mechanism for genetic alteration.

In addition to horizontal gene transfer between bacteria, bacteria can also transfer genetic material across kingdoms to the eukaryote S. cerevisiae, more commonly known as baker's yeast, an organism incredibly distant evolutionarily from any bacterial species [1]. Unlike sexual reproduction, which requires great genetic similarity between mating partners, it would appear that conjugation provides a means for transferring genetic material across vast evolutionary expanses. Our goal is to engineer E. coli to conjugate across phylogenetic kingdoms under the presence and absence of specific environmental signals. However, in order to prevent the genetic circuitry from being “evolved out,” the plasmid will confer some adaptive function to the yeast. Eventually, the yeast will be engineered to produce some beneficial product for E. coli, and the two species will live symbiotically, exchanging DNA and cellular products necessary for survival. In this way, there will be a mutualistic interaction between the yeast and E. coli, and it is hoped that the functional integrity of the genetic circuitry will remain intact.

The modular design for trans-kingdom genetic transfer could be adapted for use with various organisms under different circumstances. However, our particular design is intended for a scenario where E. coli and S. cerevisiae are in close proximity, the yeast cannot naturally digest lactose, lactose is the primary food source, and the E. coli possess a transferrable plasmid containing genes for lactose digestion. Because expending resources on lactose machinery in the presence of the more readily usable glucose would be disadvantageous, E. coli will only produce the LuxR protein in the presence of lactose, and the absence of glucose. The yeast will be engineered to produce the quorum sensing molecule, AHL. When the AHL diffuses to the LuxR proteins contained in E. coli, the production of conjugation machinery will be activated, and genetic material will be transferred to yeast. Pragmatically, this schema for trans-kingdom genetic transfer could be used to modify and engineer organisms which are normally difficult to access or operate on, and also as a means of delivering functional DNA for gene therapy. Additionally, this design may serve as an entry point for more complex, multi-organism systems.


Uwbigpicture.jpg Uwsuboverview.gif

Individual Projects

Sub#1:Activity Decision Module - LuxR production under pLac/pAraC+TetR in bacteria

Regulators: pLac

AND LUX.gif

Lactose is a disaccharide composed of glucose and galactose, and in order for an organism to metabolize lactose, it first must be broken-up into these constituent monomers. β-galactosidase is an enzyme capable of doing just that, and is naturally produced by E. coli. However, E. coli cleverly regulate their production of this enzyme to times only when it’s required. Being that lactose is a less efficient fuel than simple glucose, E. coli only want to metabolize lactose when glucose is absent. This regulation is carried out at the transcriptional level by putting the β-galactosidase gene (and 2 other genes) under the control of a promoter (the lac promoter) which is inhibited by LacI and induced by CAP. LacI is a molecule that is constitutively produced by E. coli; it can either bind to the promoter or bind to lactose, meaning that LacI only inhibits the promoter in the absence of lactose. CAP is another molecule naturally present in E. coli which is only free to bind to the lac promoter in the absence of glucose. Given that gene repression is stronger than activation, the production of β-galactosidase is only carried out when required.

In order to have LuxR produced only when glucose is absent and lactose is present, the LuxR protein generator BioBrick (part BBa_I0462) was placed under the control of the lac promoter (part BBa_R0010). The lac promoter is a commonly used transcriptional regulator, as it enables genes to be turned on/off with addition/subtraction of lactose (or IPTG) from the growth medium. On the other hand, the use of glucose as a means to regulate the activity of the promoter is not common. Thus, promoter part BBa_R0010 had to be tested to verify that it indeed behaves as the natural lac promoter does (i.e. IPTG can only successfully activate the promoter in the absence of glucose).

To carry out such a test, part BBa_R0010 was placed in front of the GFP generator BioBrick (part BBa_E0240). An assay was then carried out that characterized the promoter activity in varying concentrations of IPTG and glucose: 25 wells of a 96-well plate were filled with the mid-log culture of a LacI expressing E. coli strain (DH5a+LacIq) grown in M9 minimal media. IPTG and glucose was then added to the wells in different amounts. The GFP fluorescence of each well was then measured over a six hour period. As the plot shows below, GFP has the highest expression in the well with the highest concentration of IPTG and no glucose, and the lowest expression in the well with the highest glucose concentration and no IPTG. Additionally, in wells with both glucose and IPTG, the repression of the glucose proved stronger than the activation of the IPTG. Thus the promoter part behaves just as required. After parts BBa_R0010 and BBa_I0462 were ligated together, they were placed inside the low/medium copy, kan resistant plasmid pSB3K3. This new composite part was given name BBa_K109702.

IGEMdataPlot2.jpg
Activity of pLac in Varying Concentrations of IPTG and Glucose

A GFP generator gene (part BBa_E0240) was placed under the control of the Lac promoter (part BBa_R0010). Fluorescence was then measured under varying concentrations of IPTG and glucose to characterize the promoter's activity.

Regulators: pAraC+TetR

AND AT.gif

Since lactose and glucose play an important role in regular cellular systems, there may be some complication that could affect our genetic circuits or how cells function in general. To try avoiding problems, we make alternative promoter with AraC and TetR binding sites. AraC is an activator induced by arabinose sugar. TetR is a repressor that is made inactive by tetracycline(tc) or anhydrotetracycline(aTc). Both arabinose and tc/aTc are less essential to cells under standard lab conditions, to control LuxR production.

In the research "Programming gene expression with combinatorial promoters" [http://www.nature.com/msb/journal/v3/n1/full/msb4100187.html link] by Robert Sidney Cox, III, Michael G Surette, and Michael B Elowitz [2], it was shown that having araC at distal region(upstream -35) and tetR at proximal region(downstream -10) made the most AND-gate promoter among the combination of AraC and TetR hybrid regulators.

The first approach to make the promoter is to insert TetR binding sites into existing AraC promoter BioBrick (BBa_R0080) by QuikChange Mutagenesis method. This approach did not work out. Some possible reasons were that the primers were not well designed (i.e. homology of primers and parental plasmid were not long enough for primers to bind to parental plasmid.), and the materials were not correct or effective(reactions were made from existing lab's material without a kit).

The second approach is to PCR amplify the promoter region containing araC and tetR from the clone D29 received from Elowitz's lab. Using primers with BioBrick prefix and suffix hangings, we succeed making a BioBrick of the promoter part(BBa_K109200) and putting it in front of LuxR gene(BBa_I0462).

AraC+TetRmini.jpg

Sub#2: Signaling Module - Biosynthesis of the AHL distress signal (in Yeast)

UwAHL.gif Ultimately, our goal is to place bacterial conjugation under the control of an external distress signal from a metabolically-stressed yeast cell. Thus, it is necessary to engineer S. cerevisiae to produce the AHL signaling molecule. Our proposed method to accomplish this is to clone the AI synthase gene (BBa_C0161) into a nonstandard yeast expression plasmid, which should theoretically result in the conversion of amino acid precursors into the AHL molecule. To test whether the yeast transformants are indeed capable of AHL signaling, they can be tested in co-culture with the AHL receiver cells (BBa_T9002). Although AHL production will initially be under control of a constitutive promoter, eventually we may place it under control of a glucose-repressible promoter such as pJEN1 [3], so that the yeast will produce AHL proportionally in response to glucose starvation.

Sub#3: Conjugation Machinery Control - Replacement of Conjugative Promoters with an Inducible Promoter

AND CON.gif

The next step is to place conjugative genes under control of pLuxR (BBa_R6002), an AHL inducible promoter. The iGEM team used two approaches to place these genes under control of pLuxR.

The first approach was to augment the conjugative plasmid using Lambda Red recombineering with the intent of replacing native promoters with pLuxR. We identified two target promoters that are crucial control points in conjugation. The first target, pTrbA, encodes a transcriptional regulator for the TraII conjugation operon. The other target, pKorA, expresses a global regulatory protein with multiple binding sites across the conjugative plasmid's genome. The KorA regulatory protein is an attractive target because it controls a genetic OR switch that represses vegetative replication while promoting conjugation--a fascinating genetic component that helps the plasmid balance the metabolic demand it places on the host cell. [4]

The second approach was to knockout essential conjugation genes and complement them on secondary plasmids under control of the AHL inducible promoter. Again, the korA and trbA genes were targeted. We also targeted the trbC gene, which encodes the pilin protein from which the mating pilus is constructed. Using this approach, we were able to construct standardized BioBricks--but with the drawback that we would now have to maintain this additional complementary plasmid in our final system.

RP4 conjugation.gif

Illustration of Tra1 Conjugation Machinery

Schröder, G., S. Krause, E. L. Zechner, B. Traxler, H. J. Yeo, R. Lurz, G. Waksman, and E. Lanka. 2002. TraG-like proteins of DNA transfer systems and of the Helicobacter pylori type IV secretion system: inner membrane gate for exported substrates? J. Bacteriol. 184:2767-2779. [http://www.ncbi.nlm.nih.gov/pubmed/11976307 link].

Uwlamdared.gif


Experiment #1234
Bacteria (OD600@0.15 ≈ 3E7 bac/mL)250uL200uL100uL50uL
Yeast (OD600@0.1 ≈ 1E7 yeast/mL)250uL300uL400uL450uL
Yeast Colonies66643218
Transconjugation Efficiency (Conjugation Events/Yeast Cell)2.64E-52.13E-58.00e-64.00e-6


experiment 1 experiment 2 experiment 3 experiment 4

Sub#4: Conferred Ability Module- Yeast Shuttle Vector

Constructstandardyeastvector.jpg

Another important part involving in our controlled trans-kingdom conjugation project is the yeast shuttle vector. This plasmid is stored and maintained in E. coli, transferred to yeast via conjugation, then stored and maintained in yeast. Therefore, this yeast shuttle plasmid has a bacterial origin of replication, a stable yeast origin of replication, a conjugative origin of transfer for RP4 mobilization, a bacterial selectable marker that confers ampicilin resistance, and a gene which imparts the ability to synthesize leucine. A preliminary version of this plasmid, pAC88, was obtained from the University of Leicester, who designed it for prior research [5]. This pAC88 plasmid is a modified version of standard yeast plasmid YEp13; specifically, the origin of transfer site, OriT, from mobile plasmid RP4 was inserted into YEp13.

This pAC88 yeast shuttle vector, while suitable for our experiment, does not adhere to a standard format. Therefore, it can't be used in standard assembly, or to reuse parts. In an effort to provide the community with a standardized yeast vector, steps towards using the BioBrick construction base vector to incorporate a yeast selectable marker and yeast origin of replication have recently commenced.

Insertion of the adaptive gene into the shuttle plasmid was also attempted. Kluyveromyces lactis, a species of milk-yeast, posesses a region of chromosomal DNA that encodes for lactose digestion machinery. LAC4 and LAC12, two genes that encode for yeast galactosidase and lactose permease, respectively, are located near each other on the chromosome, and are divergently transcribed. After amplifcation of this LAC region, it was insertion into an XhoI restriction site on pAC88. However, yeast transformants remained unable to digest lactose.



[1] Sprague, George F., and Jack A. Heinemann. “Bacterial conjugative plasmids mobilize DNA transfer between bacteria and yeast.” Nature. Institute of Molecular Biology. University of Oregon. 340. 20 Jul 1989.

[2] Robert Sidney Cox, III, Michael G Surette, and Michael B Elowitz. "Programming gene expression with combinatorial promoters." Nature. Institute of Molecular Biology. 145. 13 November 2007

[3] Chambers P, Issaka A, Palecek SP. "Saccharomyces cerevisiae JEN1 promoter activity is inversely related to concentration of repressing sugar." Appl Environ Microbiol. 2004 Jan;70(1):8-17.

[4] Zatyka M, Jagura-Burdzy G, Thomas CM. "Transcriptional and translational control of the genes for the mating pair formation apparatus of promiscuous IncP plasmids." J Bacteriol. 1997 Dec;179(23):7201-9.

[5] Cashmore, Annette M., Steven Bates, and Brian M. Wilkins. “IncP Plasmids Are Unusually Effective in Mediating Conjugation of Escherichia coli and Saccharomyces cerevisiae: Involvement of the Tra2 Mating System.” Journal of Bacteriology. Dec 1998. pp 6538-6543.