Team:KULeuven/Model/Reset

From 2008.igem.org

Revision as of 14:04, 28 August 2008 by Zeunas (Talk | contribs)

  dock/undock dropdown  

Logo reset.jpg

Contents

Pulse Generator

Position in the system

The Pulse Generator-subsystem is directly linked to the Filter.

When the filter indicates that the input is zero (there is no desease), the system will (ideally) produce no lactonase. As soon as the output of the filter is one, the subsystem will produce a pulse of lactonase which will be high enough to 'remove' all HSL present in the system and in that way reset the timer.

Describing the system

Pulse Generator BioBrick.jpg

ODE's

NOT AVAILABLE

Parameters

Parameter values (Pulse Generator)
Name Value Comments Reference
Degradation rates
dRNA_cI 0.00462 s-1
dcI 7.0E-4 s-1 [http://parts.mit.edu/igem07/index.php?title=ETHZ/Parameters link]
dRNA_Lac 0.00231 s-1
dLac 2.888E-4 s-1
dRNA_Ribokey:cI 0.00231 s-1
Dissociation constants
KRibokey:cI 0.00212 kass/kdiss for the Ribokey cI complex
KcI 0.00337 binding cI on cI-Promotor [http://parts.mit.edu/igem07/index.php?title=ETHZ/Parameters link]
Transcription rates
kRNA_cI 0.025 s-1 maximal transcription rate RNA cI (no cI repressor present)
kRNA_Lac 0.025 s-1
Translation rates
kcI 0.167 s-1
kLac 0.167 s-1 RBS is B0032 (efficiency 0.3) [http://partsregistry.org/Part:BBa_B0032 link]
Hill cooperativity
ncI 2.0 [http://parts.mit.edu/igem07/index.php?title=ETHZ/Parameters link]

Models

CellDesigner (SBML file)

Pulse Generator

Matlab

Pulse Generator Matlab.jpg

Problem

The idea of a pulsgenerator as reset mechanism doesn't meet the black-box requirements for the following reasons:

  • it takes too long before the proposed system generates a pulse-like event
  • the pulse itself is too long
  • a constant lactonase production sequence generates enough lactonase to reset the timer

Constant Lactonase Production

Pictogram lactonaseproduction.png

Position in the system

The Constant Lactonase Production-system is directly linked to the Filter.

When the filter indicates that the input is zero (there is no desease), the system will (ideally) produce no lactonase. As soon as the output of the filter is one, the system starts producing lactonase and remains doing this untill the light goes off again. In this way all the HSL-molecules that are present will be 'removed' and the timer is reset.

Describing the system

see also: Project:Reset

Modeling Reset.PNG

ODE's

Parameters

Parameter values Constant Lactonase Production
Name Value Comments Reference
Degradation rates
dlactonase dLVA = 2.814E-4 s-1 LVA-tag reduces lifetime to 40 minutes [http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=106306 link]
dclosed mRNA lactonase 0.0046209812 s-1 estimate: because this RNA isn't translated, it degrades faster [http://www.pubmedcentral.nih.gov/picrender.fcgi?artid=124983&blobtype=pdf link]
dopen mRNA lactonase 0.0023104906 s-1 [http://www.pubmedcentral.nih.gov/picrender.fcgi?artid=124983&blobtype=pdf link]
dopen mRNA lactonase complex 0.0023104906 s-1 [http://www.pubmedcentral.nih.gov/picrender.fcgi?artid=124983&blobtype=pdf link]
T7 Transcription
KT7 421 dissociation constant, recalculated to remove units [http://www.jbc.org/cgi/content/full/279/5/3239 link]
kmax 0.044 s-1 maximal T7 transcription rate [http://www.jbc.org/cgi/content/full/279/5/3239 link]
Key-Lock constants
Keq 1 0,015 [M] between closed and open Lactonase mRNA, experimental [http://parts2.mit.edu/wiki/index.php/Berkeley2006-RiboregulatorsMain link]
Keq 2 0.0212 [M] between closed Lactonase mRNA and key unlocked mRNA complex, experimental [http://parts2.mit.edu/wiki/index.php/Berkeley2006-RiboregulatorsMain link]
kdis1 100 s-1 derived from experimental values [http://parts2.mit.edu/wiki/index.php/Berkeley2006-RiboregulatorsMain link]
kcomplex1 57 s-1 derived from experimental values [http://parts2.mit.edu/wiki/index.php/Berkeley2006-RiboregulatorsMain link]
kclosed 100 s-1 derived from experimental values [http://parts2.mit.edu/wiki/index.php/Berkeley2006-RiboregulatorsMain link]
kopen 1.5 s-1 derived from experimental values [http://parts2.mit.edu/wiki/index.php/Berkeley2006-RiboregulatorsMain link]
ktranslation 0.167 s-1 lock defined translation rate for Lactonase

Models

CellDesigner (SBML file)

LactonaseProduction CellDesigner.png

Matlab (SBML file)

LactonaseProduction Matlab.jpg

Simulation

Remark: up to date with latest version?

The number lactonase genes is held constant during the entire simulation. For the first 15.000 seconds the number of mRNA Ribokey is equal to 0.015 and the number of pT7 molecules to 0.4, then for 15000 s these numbers are set on 6 and 3 respectively (based on the results of the model of the filter) after which they are reduced back to 0.015 and 0.4.
We see that an increase in the number of mRNA Ribokey and pT7(due to an increase in light intensity) will lead to a much higher number of lactonase molecules.

Sim lactonaseproduction 1.png