Team:UNIPV-Pavia/Notebook/Week3

From 2008.igem.org

(Difference between revisions)

Revision as of 20:10, 22 September 2008

Home	The Team	The Project	Biological Safety	Parts Submitted to the Registry
Dry Lab	Wet Lab	$Math.gif$ Modeling	Protocols	Activity Notebook

Notebook

Week 1	Week 2	Week 3	Week 4	Week 5	Week 6	Week 7
Week 8	Week 9	Week 10	Week 11	Week 12	Week 13	Week 14
Week 15	Week 16	Week 17	Week 18	Week 19	Week 20	Week 21

Week 3: 06/03/08 - 06/08/08

06/03/08

We transformed 60 µl of TOP10 with 2 µl of the 6 parts (DNA + glycerol) we received from IGEM HQ:

BBa_C0179	BBa_C0161	BBa_R0051	BBa_I14032
BBa_I15008	BBa_I15010

NOTES: We noticed that IGEM 2007 teams which used luxI or lasR parts choosed BBa_C0061 instead of BBa_C0161 (for luxI) and BBa_C0079 instead of BBa_C0179 (for lasR). So, we decided in addition to amplify BBa_C0061 and BBa_C0079; we shall see later which one to choose for our project between the two luxI and the two lasR.

So, we cut paper spots for BBa_C0061 and BBa_C0079 and resuspended them in 10 µl of warmed TE buffer.

We transformed these 2 parts using 4 µl of DNA in TE.

We plated transformed bacteria and incubated them at 37°C overnight.

06/04/08

After overnight incubation, the following 5 plates showed colonies:

BBa_C0061	BBa_R0051
BBa_I14032	BBa_I15008
BBa_I15010

BBa_R0051 plate: very high yield from IGEM HQ DNA + glycerol

BBa_C0061 plate: medium yield from paper spot

while the following 3 plates did not:

BBa_C0079	BBa_C0179
BBa_C0161

We repeated the transformation for BBa_C0079, BBa_C0179 and C0161. We used 6 µl of DNA in TE for BBa_C0079, while we used 3 µl of DNA + glycerol for BBa_C0179 and BBa_C0161.

We plated transformed bacteria and incubated them at 37°C overnight.

While we were preparing our 5 ml cultures for the 5 working plates, we noticed that LB + Amp was contaminated! We decided to prepare a big quantity of LB + Amp and also of LB + Kan: we prepared 0.5 l LB + Amp and 0.5 l LB + Kan for liquid cultures; 0.5 l LB + Amp and 0.5 l LB + Kan for plates.

A lot of just prepared LB plates

We picked up one colony from BBa_C0061, BBa_R0051, BBa_I14032, I15008 and I15010 plates to grow 5 ml cultures of transformed bacteria overnight.

We also infected 5 ml of LB + Amp with 15 µl of BBa_B0030 glycerol stock. We incubated the 5 ml culture overnight at 37°C.

We received QIAGEN QIAprep Spin Miniprep Kit!!! We will inaugurate it tomorrow on these 5 ml cultures;)

06/05/08

We received Euroclone Antarctic Phosphatase: we are going to use it in the afternoon before ligation reaction.

We prepared 6 glycerol stocks taking 800 µl from 5 ml cultures containing:

BBa_R0051	BBa_I15008	BBa_I15010	BBa_I14032
BBa_C0061	BBa_B0030

We performed miniprep for these 6 parts with our new fantastic kit;) Plasmid quantification confirmed a higher yield than our previous QIAGEN kit.

We performed plasmid digestion for these parts (20 of 30 µl).

We had to insulate excided fragments for:

BBa_I15008 (X-P)	BBa_I15010 (X-P)	BBa_I14032 (X-P)	BBa_C0061 (X-P)
BBa_B0030 (X-P)

While we had to insulate opened plasmids for:

BBa_R0051 (S-P)

Due to the different dimension of the DNA we had to insulate, we ran 3 different gels:
- one for BBa_R0051 (S-P)
- one for BBa_I14032 (X-P) and BBa_B0030 (X-P)
- one for BBa_C0061 (X-P), BBa_I15008 (X-P) and BBa_I15010 (X-P).

We could see and cut all the bands we wanted, except for BBa_I14032, for which we couldn't see any band.

We performed gel extraction for:

BBa_R0051 (S-P)	BBa_B0030 (X-P)	BBa_C0061 (X-P)	BBa_I15008 (X-P)
BBa_I15010 (X-P)

All the 3 overnight plates worked (low yield for all).

We picked up one colony from BBa_C0161, BBa_C0179 and BBa_C0079 plates to grow 5 ml cultures of transformed bacteria overnight. We did the same thing for BBa_I14032 6/3/08 plate; we didn't use glycerol stock for BBa_I14032 because we thought there was something wrong with the colony we picked on 6/4/08.

Antarctic Phosphatase for BBa_E0240 (E-X), BBa_R0051 (S-P), BBa_B0030 (S-P), BBa_B0030 (E-X).

We calculated the amount of vector/insert for ligation reaction to have a molar ratio of 2:1 (insert:vector).

We performed ligation reaction (30 µl final volume) for (vectors are in bold type):

BBa_J23100-BBa_E0240 (Pcon(E-S)-assGFP(E-X))
BBa_J23100-BBa_B0030 (Pcon(E-S)-RBS(E-X))
BBa_R0051-BBa_B0030 (Plam(S-P)-RBS(X-P))
BBa_B0030-BBa_E0040 (RBS(S-P)-GFP(X-P))
BBa_B0030-BBa_C0051 (RBS(S-P)-cI(X-P))
BBa_B0030-BBa_E1010 (RBS(S-P)-RFP(X-P))
BBa_B0030-BBa_C0061 (RBS(S-P)-luxI_LVA(X-P))
BBa_B0030-BBa_C0078 (RBS(S-P)-lasI(X-P))

We incubated ligation overnight at 16°C.

06/06/08

We prepared 4 glycerol stocks taking 800 µl from 5 ml cultures containing:

BBa_C0161

BBa_C0179

BBa_C0079

BBa_I14032

Miniprep for BBa_C0161, BBa_C0179, BBa_C0079 and BBa_I14032.

We performed plasmid digestion for these 4 parts (20 of 30 µl).

We ran two different gels:
- one for BBa_C0161 (X-P), BBa_C0179 (X-P) and BBa_C0079 (X-P)
- one for BBa_I14032 (X-P), that is smaller than the other 3 parts

For the second time we couldn't see any band for BBa_I14032.

We performed gel extraction for:

BBa_C0161 (X-P)	BBa_C0179 (X-P)
BBa_C0079 (X-P)

Mattia cutting BBa_C0161 (X-P), BBa_C0179 (X-P) and BBa_C0079 (X-P) gel

We decided to sequence BBa_I14032 to check if the sequence is correct. Unfortunately we had not enough plasmid and so we picked another colony from 6/3/08 plate, infected 9 ml LB + Kan and incubated it overnight at 37°C. We decided to use 9 ml instead of 5 ml in order to verify if we could increment our yield without saturating the QIAGEN spin column and without performing a midiprep.

We transformed the whole ligation volume (30 µl) for all the 8 overnight ligations.

We plated transformed bacteria and incubated at 37°C overnight.

06/07/08

We took 800 µl of BBa_I14032 overnight culture to prepare a glycerol stock.

Miniprep for BBa_I14032 9 ml culture: absorbance spectrum was very good, so we decided to use 9 ml cultures even the next times.

We sent BBa_I14032 sample and VF2 primer to Primm for sequencing.

NanoDrop output for BBa_I14032 9 ml miniprep

Only BBa_J23100-BBa_B0030 (Pcon(E-S)-RBS(E-X)) plate showed colonies. We put it at 4°C.

NOTES: obviously we were not happy with this result. So, how could we do to debug this situation?
- Our hypothesis was that we had to focus on plasmid digestion process: we approximately checked the length of every opened plasmid/excided fragment we wanted to insulate on gel and they were right.
- We were sure that restriction enzymes cut both the restriction sites (E-S or X-P) for excided fragments, but we could not be so sure whether opened plasmids had been cut (E-X or S-P) in both restriction sites or only in one site.
- In previous digestion protocols to open plasmids, we performed 2 cutting cycles: one for the first enzyme (1 hour and 30 min) and one for the second enzyme (1 hour and 30 min).
- We supposed there was something wrong with that digestion protocol, so we decided to perform plasmid digestion again for our 4 plasmids to open, following the digestion protocol (read Protocols section for details).
- We also noticed that digestion protocol for excided fragments worked very well for BBa_B0030, whose fragment length is 15 bp, so we hoped that this protocol might actually work to open plasmids.
- In addition, we decided to check if our only working plate was a false positive: next week we will perform PCR/electrophoresis to check for contaminating plasmids (we could not check immediately for insert length by electrophoresis because BBa_J23100 and BBa_B0030 are small parts).

Wiki updating.

06/08/08

We picked up one colony from BBa_J23100-BBa_B0030 plate to grow a 9 ml culture of transformed bacteria overnight.

We also infected 9 ml of LB + Amp with 15 µl of BBa_B0030, BBa_B0030 (another time), BBa_R0051, BBa_E0240 glycerol stocks. We incubated 9 ml cultures overnight at 37°C.

Wiki updating.

@@ Line 39: / Line 39: @@
 !|[[Team:UNIPV-Pavia/Notebook/Week14|Week 14]]
 |-
-!|[[Team:UNIPV-Pavia/Notebook/Week8|Week 15]]
+!|[[Team:UNIPV-Pavia/Notebook/Week15|Week 15]]
-!|[[Team:UNIPV-Pavia/Notebook/Week9|Week 16]]
+!|[[Team:UNIPV-Pavia/Notebook/Week16|Week 16]]
-!|[[Team:UNIPV-Pavia/Notebook/Week10|Week 17]]
+!|[[Team:UNIPV-Pavia/Notebook/Week17|Week 17]]
-!|[[Team:UNIPV-Pavia/Notebook/Week11|Week 18]]
+!|[[Team:UNIPV-Pavia/Notebook/Week18|Week 18]]
-!|[[Team:UNIPV-Pavia/Notebook/Week12|Week 19]]
+!|[[Team:UNIPV-Pavia/Notebook/Week19|Week 19]]
-!|[[Team:UNIPV-Pavia/Notebook/Week13|Week 20]]
+!|[[Team:UNIPV-Pavia/Notebook/Week20|Week 20]]
-!|[[Team:UNIPV-Pavia/Notebook/Week14|Week 21]]
+!|[[Team:UNIPV-Pavia/Notebook/Week21|Week 21]]
 |}